T-Motor F7 30.5mm*30.5mm Flight Controller for FPV Drones, STM32F722RET6, BMI270, 5V/2A BEC

Overview

T-Motor F7 is a flight controller for FPV drones with a logical layout, designed to work seamlessly with TMOTOR F45 and F55 ESC. It features faster calculation speed, more sensitive response, and a VTX switch function intended to help address overheating issues.

Key Features

• F7 flight controller design
• Faster calculation speed
• More sensitive response
• VTX switch function (described as an easy fix for overheating problems)
• Optimized to pair with F55A PRO II; stated lower installed height after installation
• Can be connected via a 10pin silicone cord (as described by the manufacturer)
• Notes shown in interface figure: all UART support Telemetry and SBUS; Telemetry connects to TX of UART; SBUS connects to RX of UART; ADC-CURRENT requires connecting ESC current interface; UART4-RX needs ESC telemetry connection to read telemetry data

Specifications

Customer service: https://rcdrone.top/ or support@rcdrone.top

Whats Included

• 10pin silicone cord (stated)
• Soft cable and glue shell for connecting other brands 4-in-1 ESC and flight control (stated)

Applications

• FPV drones requiring a 30.5mm*30.5mm mounting pattern flight controller
• Builds using TMOTOR F45 and F55 series ESC (including F55A PRO II and F45A V2.0 as shown)
• 4-in-1 ESC and flight control stacks using the described 10pin connection method

Details

The T-Motor F7 flight controller uses a 30.5×30.5mm mounting pattern with clearly labeled pads for CAM, VTX, 5V, and ground, plus boot/reset buttons for setup.

The onboard VTX ON/PIT switch provides a simple way to control your video transmitter during setup and cooling breaks.

The T-Motor F7 30.5×30.5mm flight controller is shown stacked with an ESC and mounting hardware for a tidy, rigid build.

The T-Motor F7 flight controller uses a 30.5×30.5mm mounting pattern with clearly labeled solder pads for CAM/VTX, UART, I2C, and ESC connections.