Tattu Semi-solid State LiPo Battery Pack 330Wh/kg 33000mAh 51.8V 14S1P 10C with AS150U-F Plug for Drones

Overview

The Tattu Semi-solid State LiPo Battery Pack delivers 330Wh/kg energy density in a 33000mAh, 51.8V, 14S1P configuration with a 10C peak discharge capability and AS150U-F plug. Compared with traditional lithium batteries, this semi-solid lithium design offers higher energy and lighter weight, increasing battery endurance by approximately 30% and achieving over 500 cycles (90% initial capacity). It is a power solution for industrial drones used in mapping, inspection, surveying, delivery, and eVTOL applications where nominal discharge current typically ranges from 1–3C.

Key Features

• High energy density: 330Wh/kg for weight-critical aerial platforms.
• Semi-solid lithium architecture with solid electrolyte, silicon carbon anode, coated diaphragm technology, and ultra-high nickel technology.
• Safety performance: voltage range from 4.2V to 2.75V across the operating SOC.
• Power delivery: max constant current 3C; max peak current 10C (< 3 seconds).
• Service life: over 500 cycles while maintaining performance (90% initial capacity).
• Compact, lightweight pack supporting extended flight time for industrial drones.

Specifications

Applications

• Industrial drones for mapping and surveying
• Inspection UAVs
• Logistics and delivery drones
• eVTOL and other professional aerial platforms

Manuals (or Document links)

• Semi-solid state battery topic (Tattu)
• Recommended charger: Tattu TA3200 Dual-channel smart charger 60A/3200W for 6S-14S drone battery