WLtoys 16101 Pro 1:16 RC Car 4WD Brushless 70 km/h, LED Headlights, 2.4G Full‑Proportional RTR Off‑Road Monster Truck

Overview

The WLtoys 16101 Pro is a 1:16 4WD brushless RC Car designed for high-speed off‑road use. It features a 2840 brushless motor paired with a 35A 2S brushless ESC, metal drivetrain components, full‑proportional 2.4G control, and LED headlights with selectable modes. The included 7.4V 18650‑1500mAh Li‑ion battery supports 15–18 min of run time, and the car is ready‑to‑go out of the box.

Key Features

• Brushless power: 2840 brushless motor with 35A 2S brushless ESC
• 4WD with double‑wishbone independent suspension and upright spring damping
• Metal differential, differential cup, planetary/powder gears; metal CVD front shaft, rear dogbone, and wheel cups
• 16 ball bearings throughout; metal second floor plate, metal front/rear arm code, and metal mid‑drive shaft
• 2.4G full‑proportional synchronized remote system (full proportional throttle/steering; 4 channels; MODE1)
• LED headlights with three modes: constant light, slow flash, fast flash
• High‑toughness explosion‑proof PVC body; equipped with a head‑up wheel
• Battery: 7.4V, 18650‑1500mAh Li‑ion (T plug), 15C discharge
• ESC IPX4 level splash‑proof (per product imagery)
• Applicable sites: flat land, sand, mud, grass

Specifications

What’s Included

• Original Box
• Batteries
• Operating Instructions
• Remote Controller
• USB Cable

Applications

• Flat land
• Sand
• Mud
• Grass

Notes

• This remote control car is only suitable for high-speed driving. At very low speed, the generator may make a strange noise; this is a normal phenomenon.
• The shell is covered with a protective film. If scratches are present, remove the film.
• Original color box may be squeezed during transport.

Battery Use

• Charge promptly when depleted. If completely empty, the battery may not charge.
• Remove the battery from the RC car before charging and disconnect it from the vehicle.
• When not in use, disconnect the battery from the car and store it fully charged.

Protections

• Charging protection: constant current/constant voltage balanced charging; overcharge/overcurrent protection.
• Motor anti-seize protection: overload causes the motor to stop.
• High temperature protection: the drive control circuit stops above the set temperature, and resumes after cooling.
• ESC low voltage power-off: automatic power-off when battery is about 6.3–6.4V to prevent over-discharge.

Q&A

Q1: Why are the tires exposed?

[Special design] The toe grip is strong and not easy to drift, improving stability and tire grip when cornering.

Q2: How to adjust the tire inclination?

Use the trim and throttle fine adjustment buttons on the remote control.

Q3: Missing accessories?

Check the package carefully. If not found, provide a full unboxing video so the warehouse can verify and resolve.

Q4: Remote cannot connect?

Ensure the battery is fully charged, then manually pair the car and remote (see user manual). Testing motherboard voltage helps diagnose.

Q5: Steering works but no forward/reverse?

Confirm the battery is charged; then test motherboard and motor voltage to analyze the issue.

Details

Upgraded 1:16 RC car with brushless motor, four-wheel drive, 70 km/h speed, 2840 brushless motor, 17G three-wire steering gear. Features anti-collision body, high-speed performance, and five powerful upgrades for enhanced off-road racing.

35A brushless ESC, metal differential and transmission, reinforced nylon-metal chassis, six metal supports, durable shock absorbers, dog bones, drive shafts, and bearings for high-performance RC driving in a 1:16 scale WLtoys 16101 Pro.

Powerful performance ideal for rough terrain, reaching speeds up to 70 km/h. Features IPX4 splash-proof ESC with low voltage protection, temperature control, and anti-motor stuck technology. Equipped with a metal cooling system and durable metal front and rear differentials for enhanced longevity and smooth, natural turns. High-performance components ensure reliable operation in tough conditions. Power on via long press switch. Built for resilience and efficiency on challenging surfaces.