XF C-20T 3 Axis FPV Gimbal HeadTracker

Overview

The XF C-20T HeadTracker is designed to elevate your FPV experience, offering a revolutionary 3-axis somatosensory motion control system. With a built-in battery, this compact and lightweight headtracker allows you to control both the gimbal and aircraft simply by moving your head when installed on FOV goggles. This enables an immersive, high-quality first-person control experience.

Note: The headtracker includes a built-in battery, which may result in slightly longer shipping times.

Key Features

• 3-Axis Somatosensory Control: Provides smooth and precise motion control for an unparalleled FPV experience.
• PPM and UART Data Output: Supports seamless communication via RC links or datalinks, enabling versatile remote control of the gimbal and aircraft.
• Immersive Control Experience: Intuitive motion-based controls enhance flight and gimbal operation, making it perfect for FPV enthusiasts.

Specifications

• Dimensions: 45 × 28.2 × 14.2 mm
• Weight: 16 g
• Built-in Battery: 1.11Wh (3.7V, 300mAh)
• Operating Time: Approx. 3 hours (measured at 25°C with a datalink module installed)
• Charging Type: 5VDC, 1A

Package Includes

• 1 × Headtracker

FAQ

1. When using head chasing to control the rotation of the gimbal, the gimbal rotates slowly in a stationary state. How to deal with this?
   When the head chasing module is installed, avoid ferromagnetic objects that might interfere with the magnetic sensor of the head chasing module. Alternatively, use software to check the working status and recalibrate the gyroscope and magnetic sensor if necessary.

2. How to change the installation direction of the head chasing module?
   Use software to recalibrate the reference axis of the head chase module.

3. The PPM output stroke of the head chasing module is not enough. How to deal with this?
   Adjust the settings via software or modify the PPM channel travel value in the remote control.

4. How long does it take for the head-chasing battery to be fully charged?
   When using a 5V/1A adapter, it takes approximately 1 hour to fully charge the battery from a completely depleted state.

5. Does the head chase module support charging and using at the same time?
   Yes, it is supported.

6. When wearing FPV glasses and using the head chasing module, how to know the remaining power of the head chasing module?
   The head chasing module includes a built-in buzzer that alerts users when the remaining working time is less than 1 hour.

7. Does the head chasing module support locking the rolling shaft, that is, the head chasing module does not control the rotation of the gimbal rolling shaft?
   Not supported.

8. During use, if the head chasing module is shut down without power, how will the gimbal react?
   The gimbal will maintain the angle of the head chase at the last moment before the power is cut off.

XF-C20T 3-Axis FPV Gimbal HeadTracker features a cooling fan, headtracker module, bottom board kit, moonlight antenna mount, and data fan mount. This kit includes a tx link module for seamless communication.

XF-C20T 3-Axis FPV Gimbal HeadTracker with Cooling Fan, Headtracker Module, Bottom Board, and Data Link Module for HD Video Recording.