Foxtech XLINK-30 XLINK-50 30KM 50KM Long Range Data/Video Wireless Transmitting System

XLINK is a point-to-point data/video wireless transmission system designed for industrial UAVs, ground robots and other data communication applications, featuring 30km/50~70km long transmission distance.

XLINK integrates the technology of 4G, 5G, WIFI, and adopts OFDM technique and multipath anti-interference technology, which has the advantages of long distance transmission, low latency, strong diffraction performance, and big data bandwidth communications.

A great highlight of XLINK is that it supports multi-node interlinked to form a communication mesh, in which one node is too far from the ground station to receive signals, it is able to transmit data to its nearest node, by which data can be sent back to the ground station.

Warning: Do not power on before installing ANT1/ANT2, otherwise it could cause damage to XLINK and burn it out.

Key technology:

- OFDM Technology

- Wireless Mesh Network Transmission

- Physical Layer Encryption

- Multipath Anti-interference Technology

XLINK-30 Specifications:

Frequency Band: 1410MHz ~ 1470MHz

Bandwidth: 4MHz; 8MHz; 10MHz; 14MHz; 20MHz

Transmitting Antenna: 2*Tx & 2*Rx

Modulation Technique: OFDM

Communication Port: 1*RJ45(Ethernet)
                                1*RS232(UART)
                                2*TTL(UART)

Voltage: DC 9V ~ 36V; Typical Value 12V

Transmitting Power: ANT1, 0.5W

                                  ANT2, 0.5W

Power Consumption: Air Unit:≤12W

                                   Ground Unit:≤6W

Bit Rate: Air Unit to Ground Unit 1.2Mbps ~ 12Mbps

               Ground Unit to Air Unit 115Kbps ~ 1Mbps

Transmission Delay: <200ms

Encryption Method: AES 128bit, Physical Layer Encryption

Size: 135mm*57mm*16.4mm

Weight: 174g

Transmission Distance: 30km

Working Temperature: -40℃ ~ + 55℃

Note: Specifications that are not particularly noted apply to both air unit and ground unit.

Your Purchase Includes:

XLINK-30/XLINK-50 Combo:

1x XLINK-30/XLINK-50 Air Unit

1x XLINK-30/XLINK-50 Ground Unit

2x Transmitter Antenna for Air Unit

1x High-gain Panel Antenna

2x J30J Wires

2x Antenna Feeder

XLINK-30/XLINK-50+AAT Combo: 

1x XLINK-30/XLINK-50 Air Unit

1x XLINK-30/XLINK-50 Ground Unit

2x Transmitter Antenna for Air Unit

1x High-gain Panel Antenna

2x J30J Wires

2x Antenna Feeder

1x Archer AAT Auto Antenna Tracker(antenna not included)

1x Power Cable

2x Data Cable

XLINK-30 User Manual

XLINK-50 User Manual

The XLINK series is a point-to-point wireless data/video transmission system designed for use in industrial unmanned aerial vehicles (UAVs), ground robots, and other data communication applications.

The Foxtech XLINK series utilizes advanced technologies such as 4G, 5G, and Wi-Fi, combined with Orthogonal Frequency Division Multiplexing (OFDM) and multipath anti-interference techniques. This enables long-distance transmission with low latency, robust diffraction performance, and high-bandwidth data communications capabilities.

The Foxtech XLINK-30 offers an impressive range performance, allowing for smooth and reliable transmission over long distances. Key features include: up to 20km transmission distance with 170ms latency, as well as support for reception of high-quality images and data retrieval in under 200ns.

Data transmission occurs via TTL or RS-232 (UART) ports from the drone/gimbal to the ground station, while image data is transferred through an RJ45 Ethernet port. Transmission latency is under 20ms.

The Foxtech XLINK-30/XLINK-50 wireless transmitting system has a transmission distance of up to 30km/50km, with transmit power of 2 x 0.5W or 2 x 1W. Power consumption is 12W for the transmitter and 13W for the receiver. It supports two channels: Channel 1 for IP and RS-232 protocols.

The system features an LED indicator with the following states: PWR (Power) - green indicates normal operation, and DEBUG - check for synchronization (SYNC) - green indicates successful connection and receipt of data before use.