T-Motor VZ27x11 27x11 Matte Carbon Fiber Propeller, Flange Mount Ø10, for VTOL Fixed-Wing UAVs

Overview

The T-Motor VZ27x11 is a VTOL propeller designed for VTOL fixed-wing UAVs in multicopter mode, combining aerodynamic design with composite construction for reliable thrust response and durability in demanding operating conditions.

Key Features

• High strength: Designed to withstand centrifugal loads and maneuver-induced alternating loads at high RPM to help prevent structural failure.
• High stiffness: Supports blade-tip clearance in compact layouts, suppresses aeroelastic deformation, and helps prevent flutter.
• Lightweight design: Reduced moment of inertia for rapid thrust response and higher flight control bandwidth.
• VTOL-oriented aerodynamics: Optimized for vertical takeoff/landing thrust and reduced profile drag when the propeller is not rotating during cruise.
• Transition stability focus: Designed to resist complex flow-field interference such as high angle of attack, asymmetric airflow, and periodic load variations.
• Composite process features: Bending & torsion resistant layup design; prepreg compression molding for integrated forming (product porosity below 1%); PMI foam core structure.
• Performance comparison notes (VZ Series): 30% flexural strength and 20% torsional stiffness (from comparative testing).

Specifications

What’s Included

• Propeller blades: CCW x1, CW x1
• Propeller cover plate (Φ32*3mm) x2
• Socket head screws (M3*18mm) x8

Applications

• VTOL fixed-wing UAVs (multicopter mode)
• Industrial VTOL inspection platforms

For pre-sales fitment questions (motor matching, mounting compatibility) or after-sales support, contact support@rcdrone.top or visit https://rcdrone.top/.

Notes

• Appearance diagrams and product renderings are for reference only; the actual product shall prevail.
• Flexural strength and torsional stiffness improvements are derived from comparative testing between the VZ Series propeller and the G Series propellers.
• Bolt shear load data is sourced from simulation comparisons between installation bolts for the VZ Series propellers and those for the V Series propellers.
• Test data were obtained under specific conditions using equipment within the manufacturer’s laboratory; actual data and parameters may vary depending on environment, platform, software, and other factors.

Details

The T-Motor VZ27x11 matte carbon fiber propeller features a sleek black blade design with visible carbon weave for UAV builds.

The VZ27x11 propeller’s sculpted blade profile and pitch geometry are designed for efficient airflow on VTOL fixed-wing UAV setups.

The flange-mount hub design uses multiple bolts for a secure propeller installation on compatible UAV motors.

The VZ27x11 matte carbon fiber blade features a smooth, curved airfoil profile suited to VTOL fixed-wing UAV prop setups.

The VZ27x11 matte carbon fiber propeller uses a flange-mount hub with multiple bolts to secure the blade assembly on VTOL UAV builds.

A flange-mount hub secured with multiple bolts helps keep the carbon-fiber propeller firmly attached under load.

The propeller’s blade profile is shown with a velocity-magnitude airflow simulation to help evaluate how air moves along the surface.

A CFD airflow pathlines graphic helps visualize how air moves along the propeller blade profile.

The VZ27x11 propeller’s blade profile is modeled to visualize airflow streamlines and tip-vortex behavior for setup and analysis.

CFD airflow visualization supports evaluating propeller aerodynamics during VTOL fixed-wing UAV development.

The matte carbon fiber UAV propeller is secured on a fixture for precise measurement and quality inspection.

The VZ27x11 propeller uses a Ø10 flange mount with a 4×Ø3 hole pattern on a Ø20 bolt circle for secure hub installation.

The VZ27x11 propeller set includes CW and CCW carbon fiber blades plus two 32×3 mm cover plates and eight M3×18 mm socket head screws for flange mounting.