2-Pack Ovonic Force 3S 1300mAh 120C 11.1V LiPo Batteries XT60 for 5-inch FPV Drone, Glider, RC Helicopter
2-Pack Ovonic Force 3S 1300mAh 120C 11.1V LiPo Batteries XT60 for 5-inch FPV Drone, Glider, RC Helicopter
Ovonic
āĻĒāĻŋāĻāĻāĻĒā§āĻ° āĻāĻĒāĻ˛āĻā§āĻ¯āĻ¤āĻž āĻ˛ā§āĻĄ āĻāĻ°āĻž āĻ¯āĻžāĻ¯āĻŧāĻ¨āĻŋ
Overview
Ovonic Force 3S LiPo battery pack set (2-pack), rated 1300mAh 11.1V with 120C discharge and XT60 plug, intended for 5-inch FPV drone builds and compatible RC models where voltage, dimensions, and connector types match (including gliders and RC helicopters).
Key Features
- Battery rating: 3S1P, 11.1V, 1300mAh
- Discharge rating: 120C (max burst discharge rate listed: 240C)
- Connector setup: XT60 discharge plug + balance lead (JST-XH; JST-XHR-4P shown)
- 12 AWG wire shown on the pack
- Image callouts: lower internal resistance, longer cycle life, more runtime
Specifications
| Brand | Ovonic |
| Chemistry | Li-Polymer |
| Configuration | 3S1P |
| Nominal Voltage | 11.1V |
| Capacity | 1300mAh |
| Discharge Rate | 120C |
| Max Burst Discharge Rate | 240C |
| Discharge Plug | XT60 |
| Balance/Charge Plug | JST-XH (JST-XHR-4P shown) |
| Wire | 12 AWG (shown) |
| Battery dimensions (shown) | 73.7 x 35.2 x 21.4 mm (2.90 x 1.39 x 0.84 inch) |
| Battery weight (shown) | 111 g (0.24 lb) |
| Battery dimensions (also listed in text, with tolerance notes) | 67 x 35 x 28 mm |
| Net weight (also listed in text, dev.20g) | 125 g (per unit) |
What's Included
- 2 x Ovonic Force 3S 1300mAh 11.1V 120C LiPo Battery (XT60)
- 1 x User Manual
- 1 x Wrapped box
- 2 x Brand stickers
For help verifying connectors, fitment, or charger setup before purchase, contact [email protected] or visit https://rcdrone.top/.
Applications
- 5-inch FPV drone power systems (when space and connector match)
- RC gliders and RC helicopters (when voltage, dimensions, and plugs match)
- Also shown as suitable for RC airplane, boat, RC car, vehicles, trucks, etc., where specifications match
Usage Notes
- Fitment depends on voltage and plug type; dimensions must also match the available battery bay space.
- Stop charging immediately if any cell reaches 4.2V. Normal cell voltage is listed as 3.7V to 4.2V.
- Check the battery surface condition and pack voltage before use.
- If a new pack will not hold a full charge or loses charge quickly, use a balance charger and perform several charge/recycle cycles first.
Details
Sized for tight 5-inch FPV frames with a compact 3S pack profile and an XT60 lead for clean installs.
XT60 discharge connector pairs with a JST-XH balance lead, and the thicker 12AWG wire supports high-current FPV setups.
Use the pack where voltage, battery-bay space, and connector type matchâideal for 5-inch FPV drones and compatible RC builds.
