Hobbywing XeRun XR10 PRO G3X 160A Brushless ESC for 1/10 Scale Racing Car, 2S LiPo, 5-7.4V BEC

Overview

The Hobbywing XeRun XR10 PRO G3X is a brushless ESC (electronic speed controller) designed for 1/10 scale RC racing car stock-class use, with setup options for different track conditions and driving styles.

Key Features

• Purpose-built for 1/10 stock class racing with optimized performance and precision control.
• Three selectable preset profiles for 1/10 RC car racing; profiles can be customized and renamed.
• Internal electronic key switch; external switch port supports an external switch (not included, sold separately).
• Separate programming port can power an external fan or connect to an LCD Program Box Pro or OTA Programmer.
• Variable frequency regulation of PWM and brake frequencies for driving/braking control tuning.
• Softening function for power delivery tuning and driving efficiency.
• Disc Brake mode for smoother and stronger braking performance.
• Protections: low-voltage cutoff protection (LVC), ESC and motor thermal protection, fail-safe (throttle signal loss protection).
• Built-in data recording module; connect to the OTA Bluetooth module after use to view performance data.

Customer service: support@rcdrone.top | https://rcdrone.top/

Specifications

Applications

• 1/10 offroad stock racing
• Drift
• F1
• Rally

Manuals

• User's manual - XERUN XR10 PRO G3/G3X ESC (PDF)

Connection & Safety Notes

• Motor connection (sensored): Connect ESC terminal A to motor A, B to B, and C to C. Connect the sensor wire to the motor sensor port. Incorrect connections may cause damage.
• If motor direction is reversed, adjust the parameter item Motor Rotation.
• If ESC terminal A must connect to motor terminal C due to layout, set Phase-AC Swap to Enabled.
• Receiver connection: Connect the ESC throttle cable to the receiver throttle (TH) channel. The cable outputs 5-7.4V to the receiver and steering servo. Do not connect a separate battery to the receiver; if additional power is needed, disconnect the red wire on the throttle plug from the ESC.
• Battery connection: Ensure correct polarity (+ to +, - to -). This ESC does not have reverse polarity protection; incorrect polarity can damage the ESC.
• Safety note from the wiring guidance: Remove the pinion gear before calibration/programming, and keep the wheels off the ground when turning on the ESC.

Details

The XeRun XR10 PRO G3X ESC connects to the battery, receiver, and sensored brushless motor via A/B/C motor leads plus a sensor wire to the motor sensor port.