उत्पाद जानकारी पर जाएं
1 का 5

Lanxiang 21700 2S FPV Goggle Battery – 4800mAh / 5000mAh Kits & Accessories

Lanxiang 21700 2S FPV Goggle Battery – 4800mAh / 5000mAh Kits & Accessories

Lanxiang

नियमित रूप से मूल्य $42.85 USD
नियमित रूप से मूल्य विक्रय कीमत $42.85 USD
बिक्री बिक गया
कर शामिल हैं. शिपिंग भुगतान के समय गणना की जाएगी।
Product Family
Configuration
पूरी जानकारी देखें

Overview

The Lanxiang 21700 2S lithium-ion battery range powers compatible FPV goggles with a compact 7.4V pack, a flexible barrel-connector lead and a built-in protection board. Choose a 4800mAh kit, a specified 5000mAh bundle, or the matching charger, protective bag, cable or printed holder.

Features

  • Two 21700 lithium-ion cells form a 2S battery pack for low-current goggle power; this is not a high-discharge flight battery.
  • The built-in protection board provides low-voltage, overcharge and short-circuit protection. Correct charging and handling are still essential.
  • The flexible silicone power lead resists everyday bending and abrasion; soldered cable connections are reinforced with adhesive.
  • A dedicated 3D-printed holder helps retain the battery. Select a kit that includes the holder or purchase it separately.
  • The optional extension lead supports pocket carry, and the protective bag provides a separate storage enclosure.

Specifications

Parameter Specification / applicability
Battery construction 21700 cylindrical lithium-ion cells, 2S
Nominal voltage 7.4V for the battery packs
Capacity 4800mAh for the first battery kit; 5000mAh for the two explicitly named 5000mAh bundles. The battery-and-bag option does not specify capacity.
Protection Low-voltage, overcharge and short-circuit protection board
Charging Compatible 2S lithium-ion charging; the dedicated charger output is 8.4V DC, 2A. Do not use an incompatible charge profile.
Dedicated charger input 100–240V AC, 50/60Hz; two flat mains pins
Charger output polarity Center-positive, as marked on the dedicated charger
Cable connector size 5.5mm outer × 2.1mm inner diameter (5521); XT60 on the charging adapter
Protective bag 18 × 7 × 6cm; sold individually or in the battery-and-bag option

Compatibility and charging

For FPV goggles that accept the pack voltage, 5.5 × 2.1mm connector and matching polarity. Check the requirements of your specific SKYZONE, Fat Shark or DJI FPV goggle model before connection; the brand name alone does not establish compatibility. Runtime varies with goggle power draw and operating conditions.

Never short the terminals or exceed the rated charging voltage or current. Store the battery separately with protected terminals. Do not leave charging unattended, and do not remove the pack wrapping or modify its protection board.

Charge current must not exceed 0.5C: 2.4A for a 4800mAh pack or 2.5A for a 5000mAh pack. The dedicated 2A charger is below these limits. Disconnect the battery from the goggles after use to avoid over-discharge. For long-term storage, use the correct 2S lithium-ion storage program. Keep the battery and charger away from flammable materials, do not use a damaged pack, and never expose the battery to fire.

What's Included

Select one of the following configurations. Accessory-only options do not include a battery.

Configuration Contents
4800mAh Battery + Charge Cable + Holder One 4800mAh battery, XT60-to-5.5 × 2.1mm charging cable and printed holder. Charger not included.
Dedicated Battery Charger One dedicated 8.4V 2A charger. No battery.
5000mAh Battery + Dedicated Charger One 5000mAh battery, dedicated charger, printed holder and adapter cable as pictured.
2S 5000mAh Battery + Pocket Extension One 2S 5000mAh battery and pocket extension cable.
Goggle Battery Protective Bag (18 × 7 × 6cm) One protective bag, 18 × 7 × 6cm. No battery.
Goggle Battery + Protective Bag One goggle battery and one protective bag. Capacity is not specified for this bundle.
XT60 to 5.5 × 2.1mm Charge Cable One XT60-to-5.5 × 2.1mm adapter cable. No charger or battery.
5.5 × 2.1mm Pocket Extension Cable One 5.5 × 2.1mm extension cable. No battery.
3D-Printed Battery Holder One printed retention holder. No battery.

Applications

Powering compatible FPV video goggles during flying sessions, replacing a suitable external goggle battery, or assembling a matching pocket-carry power setup with the optional extension cable.

FAQ

Does every option include a battery?
No. The charger, bag, two cables and printed holder are also sold separately. Check the selected configuration and its contents.

Is the battery always 5000mAh?
No. The first kit uses the pictured 4800mAh pack; two bundles explicitly specify 5000mAh. The battery-and-bag bundle does not specify capacity.

Can the XT60 adapter charge the battery by itself?
No. It is only a cable. Use a compatible 2S lithium-ion charger with the correct voltage and polarity; the dedicated charger is rated 8.4V DC, 2A.

Will it fit every FPV goggle?
Compatibility depends on your goggle's accepted voltage, connector dimensions and polarity. Check the exact model before use.

Visual Details

Battery handling guidance above the 4800mAh battery
Use a compatible 2S lithium-ion charger and keep the terminals protected from short circuits. The green-lead battery is the 4800mAh version.
Battery rear label and white balance connector
The rear label and separate balance lead help identify the battery and its wiring. Keep both connectors protected when the battery is stored.
4800mAh kit and complete close-up of two cells with protection board
The printed holder retains the pack, while the internal protection board connects the two cylindrical cells. The exposed-cell view is for construction reference; do not remove the battery wrapping.
Two protective battery bags shown for exterior comparison
The exterior views illustrate the protective bag design. The bag-only option supplies one bag, not the pair shown.
Side profile and back panels of the protective bags
The side profile and rear panels show the bag shape and closure. Choose the 18 × 7 × 6cm bag option for one protective bag.
Front of the single protective battery bag
This is the front closure of the protective bag. A battery is included only when you select the battery-and-bag bundle.
Open protective bag demonstrating its internal space
The open bag illustrates usable storage space. The multiple demonstration batteries inside are not included with the bag-only option.
5.5 by 2.1mm pocket extension cable
The 5.5 × 2.1mm extension lead allows the battery to be carried in a pocket. Check the connector and polarity before connecting your goggles.
XT60 to 5.5 by 2.1mm charging adapter cable
The XT60-to-5.5 × 2.1mm lead is a charging adapter cable; it does not regulate voltage or act as a charger.
5000mAh battery with holder and adapter lead
The 5000mAh pack is shown in its printed holder with the adapter cable. Select a 5000mAh bundle when that capacity is required.
Dedicated lithium-ion charger with 8.4V 2A output label
The dedicated charger is marked 100–240V AC, 50/60Hz input and 8.4V DC, 2A output. Its barrel connector is marked center-positive.
Charger two-flat-pin mains plug and barrel socket
The charger uses two flat mains pins and a barrel output socket. Confirm that its plug format suits your mains outlet.
5000mAh battery kit with dedicated charger
The charger bundle includes the 5000mAh battery, printed holder, charging adapter lead and dedicated charger shown here.