ZYE 4S HV 15.8V 13000mAh 5C Solid State LiPo Battery – 205.4Wh

Overview

The ZYE 4S HV 15.8V 13000mAh Solid State LiPo Battery is a high-capacity, high-energy-density battery designed for long-endurance UAVs, fixed-wing aircraft, VTOL platforms, robotics, and other electric systems requiring extended runtime.

Built with high-voltage solid-state lithium cell technology, this battery provides a 15.8V nominal voltage, 13000mAh capacity, and approximately 205.4Wh of nominal energy. The pack supports a 5C continuous discharge rate, delivering up to 65A continuous current.

With dimensions of approximately 145 × 54 × 48mm and a weight of around 780g, it offers substantial capacity in a relatively compact form factor.

Key Features

13000mAh High Capacity

The 13Ah capacity provides extended operating time for UAVs, aircraft, robots, and portable electric systems compared with lower-capacity 4S batteries.

4S High-Voltage Configuration

The battery uses a 4S HV configuration with:

• Nominal voltage: 15.8V
• Maximum charge voltage: 17.8V
• Maximum cell voltage: 4.45V per cell
• Nominal energy: 205.4Wh

5C Continuous Discharge

The battery supports a maximum continuous discharge rate of 5C, corresponding to approximately 65A continuous current.

This makes it suitable for propulsion systems that require stable current output during takeoff, cruising, maneuvering, and sustained operation.

Compact High-Energy Design

The battery measures approximately 145 × 54 × 48mm, allowing a large 13000mAh capacity to fit into relatively compact battery compartments.

Wide Operating Temperature Range

The specified operating temperature range is -20°C to 65°C, supporting operation in a variety of environmental conditions.

Preinstalled Cables and Balance Connector

The battery is supplied with preinstalled power cables and a balance connector for compatible 4S HV balance-charging systems.

Specifications

What’s Included

• 1 × ZYE 4S HV 13000mAh Solid State LiPo Battery
• 1 × Preinstalled main power cable
• 1 × Preinstalled 4S balance connector

Applications

This battery is suitable for:

• Long-endurance multirotor drones
• Industrial UAVs
• Fixed-wing aircraft
• VTOL aircraft
• Mapping and surveying drones
• Inspection UAVs
• Agricultural drone systems
• Mobile robots
• Unmanned ground vehicles
• Portable electric equipment
• Custom 4S high-voltage power systems

Charging and Usage Notes

• Use only a charger compatible with 4S HV lithium batteries.
• The maximum charging voltage is 17.8V, equivalent to 4.45V per cell.
• A standard 4S LiPo charger limited to 4.20V per cell will not fully charge this battery.
• Confirm that the ESC, motor, power distribution board, voltage regulator, and other electronics can tolerate a fully charged voltage of 17.8V.
• Do not exceed the specified 65A maximum continuous current.
• Always use balance charging and confirm the correct battery type, cell count, charging voltage, and current before charging.
• Do not charge or use a swollen, punctured, damaged, leaking, or overheated battery.
• Keep the battery away from flames, water, conductive materials, and excessive heat.
• Store the battery in a cool, dry, fire-resistant location.
• Battery dimensions and weight may have minor manufacturing tolerances.

Voltage clarification: 15.8V is the nominal voltage, while 17.8V is the fully charged voltage.