OVONIC 11.1V 3S 450mAh 80C LiPo Battery XT30 (3S1P, 41g) for Micro FPV Racing Freestyle Cinewhoop

Overview

The OVONIC 11.1V 80C 450mAh 3S LiPo battery with XT30 plug is a compact power pack for micro FPV drones used in racing, freestyle, Tiny Whoop, and cinewhoop builds. It combines a 3S1P (11.1V) configuration with an 80C discharge rate for responsive throttle feel, while keeping weight to 41g (0.08lb) for small to medium-size setups.

Key Features

• High output for FPV flight: 80C discharge rate designed for rapid power delivery during acceleration and throttle changes.
• 3S voltage in a compact size: 11.1V (3S1P) with 450mAh capacity for space- and weight-sensitive builds.
• XT30 main connector: XT30 plug for a secure power connection.
• Balance lead included: JST-XHR-4P balancer connector for 3S balance charging.
• 16 AWG leads: Uses 16 AWG wire gauge.
• Stacking technology claims (manufacturer-stated): Higher energy density +6%, longer running time +12%, lower battery swelling -8%, lower internal resistance -4%.

Specifications

Compatibility

Battery fit depends on matching voltage, dimensions, and plug with the RC model. This pack is described for small to medium FPV drones, particularly builds in the 2-inch to 4-inch range, including racing, freestyle, Tiny Whoop, and cinewhoop setups.

• 2.5-inch to 3-inch micro drones: iFlight ProTek 25; BetaFPV Meteor 85X; Emax Tinyhawk 2 Freestyle; Diatone QX Series (QX90 & QX75)
• 3-inch to 4-inch freestyle drones: iFlight Chimera4; GEPRC Phantom 2; TBS Source One; BetaFPV X-Knight
• Cinewhoop drones: GEPRC CineBee 3"; iFlight Cinebee 4K; BetaFPV 85X
• Tiny Whoops and micro FPV drones: BetaFPV 85X; Mobula7 HDZero; Emax Tinyhawk 2
• Racing drones: Lumenier QAV-S; iFlight Nazgul5

This battery is also presented for general RC use where connectors and voltage match, including airplane, boat, car, and truck models.

What's Included

• 11.1V 80C 450mAh LiPo Battery (XT30)
• User Manual x1
• Packaging Box x1
• Brand Stickers x2

Charging & Safety Notes

1. Only use it when voltage and plug match the RC model.
2. Stop charging immediately when the cell voltage reaches 4.2V (normal cell voltage is between 3.7V to 4.2V).
3. Before use, check whether the battery surface is intact and whether the voltage is normal.
4. If a new battery will not hold a full charge or loses charge quickly, use a balance charger to charge and recycle several times first.

For product support or order assistance, contact https://rcdrone.top/ or email [email protected].

Details

Compact 3S 450mAh pack with an 80C discharge rate, XT30 main lead, and JST-XHR-4P balance connector for micro FPV builds.

Manufacturer-stated stacking-cell design targets higher energy density and longer runtime with reduced swelling and internal resistance.

Suitable for RC models when the voltage, dimensions, and connector match your setup.

Everything arrives ready to use, including the battery, retail box, user manual, and OVONIC stickers.