HRB 2-Pack 6S 22.2V 6200mAh 100C LiPo Battery EC5 + 7-Pin Balance for RC Car/Heli/EDF Jet

Overview

This HRB LiPo battery set includes 2 packs of 6S (22.2V) 6200mAh high-discharge batteries rated at 100C, designed for RC car, helicopter, and EDF jet power setups that match the required voltage, size, and connector. Each pack uses an EC5 connector and a 7-pin balance port.

Key Features

• Battery configuration: 6S1P
• Rated capacity and voltage: 6200mAh, 22.2V
• Continuous discharge rate: 100C
• Connector: EC5
• 7-pin balance port
• 10AWG silicone wire
• Energy marking on label: 137.64Wh
• Size tolerance note: 0–3mm / 0.12in difference

Specifications

What's Included

• HRB 6S 22.2V 6200mAh 100C LiPo battery with EC5 (x2)

Applications

• RC car / truck
• RC helicopter
• EDF jet
• RC airplane, quadcopter, and boat setups where voltage, physical size, and plug are matched

Charging & Care Notes

• Do not overcharge above 4.2V per cell.
• Do not over-discharge below 3.7V per cell.
• Best performance may be reached after 2–3 complete cycles at 1C charge & discharge.
• If the battery does not hold a full charge or loses charge quickly, use a balance charger and cycle several times.
• Suggested charge rate: 3.1A–6.2A (0.5C–1C).
• For long-term storage, keep around 3.85V per cell and check every 1–2 months.
• Using a LiPo safety bag is recommended for transport and charging.
• Recommended to use a balance charger; do not leave charging unattended.

For product support or help confirming connector/fitment, contact [email protected] or visit https://rcdrone.top/.

Basic Connection Steps

1. Turn off the power of the RC model.
2. Place the battery in the battery compartment.
3. Fasten the battery securely.
4. Connect the plugs correctly.

Details

High-discharge 6S 22.2V packs with EC5 connector, 7-pin balance lead, and 10AWG silicone wire for secure power delivery.

Fits common RC car battery compartments when the dimensions and connector match your setup.

Works across RC cars, helicopters, airplanes, and boats where 6S voltage, physical size, and EC5 plug are required.