RATEFPV Snap 30 3 Inch Cinematic Cinewhoop FPV Drone with ELRS, DJI O4/O4 Pro Compatible
RATEFPV Snap 30 3 Inch Cinematic Cinewhoop FPV Drone with ELRS, DJI O4/O4 Pro Compatible
RATEFPV
受取状況を読み込めませんでした
Overview
The RATEFPV Snap 30 is a 3-inch cinematic cinewhoop FPV drone with an ELRS configuration for indoor, tight-space, and outdoor flying. Its protected injection-molded structure, T700 carbon frame plate, modular video-transmission design, and front camera guard support practical maintenance and component protection.
Key Features
- Tool-free modular VTX system for fast installation and transfer between devices.
- Full-body injection-molded protection structure for core components.
- T700 carbon frame plate with 2.5 mm thickness.
- Four-screw base-plate access for maintenance.
- Dual front and rear battery straps help keep the battery in position.
- Front injection-molded camera guard.
- Factory-installed ice blue 12V COB light strip.
- Rear GPS mounting provision compatible with size 121 GPS modules.
Specifications
| Flight controller / ESC | F435 40A AIO |
| Frame | Snap-X |
| Carbon plate thickness | 2.5 mm |
| Wheelbase | 140 mm |
| Battery connector | XT30 |
| Recommended battery | LiHV 660mAh-1100mAh |
| Propeller | HQProp DT76MMX3V2 |
| Maximum endurance | About 8 min |
| Weight | 220 +/- 5 g, battery not included |
| GPS compatibility | Size 121 |
| Video transmission compatibility | DJI O4 Air Unit, O4 Pro Air Unit |
Video System Options
The PNP version does not include a VTX or camera. It is compatible with DJI O4, O4 Wide, and O4 Pro systems. DJI O4 and O4 Pro configured versions include a wide-angle lens kit. DJI O4 and O4 Pro installations may require the applicable mounting components, depending on the selected configuration.
For assistance selecting a compatible configuration or accessory, contact rcdrone.top.
Applications
- Indoor FPV flying
- Tight-space flying
- Outdoor cinematic and freestyle FPV flying
Video
Details
RATEFPV Snap 30 combines a compact cinewhoop layout with protected propeller ducts for indoor, tight-space, and outdoor FPV flying.
Tool-free modular access supports quick installation and transfer of compatible video-transmission components.
The Snap-X frame uses a 2.5 mm T700 carbon plate for a lightweight, rigid foundation.
Removing four base-plate screws provides direct access to the internal assembly for maintenance.
Dual battery straps at the front and rear help keep the battery positioned during flight.
An injection-molded front camera guard helps protect the lens area from frontal impacts.
The factory-installed ice blue 12V COB light strip adds a visible accent around the protected frame.
Full-body injection-molded protection surrounds the propellers and helps shield core components.
Configuration details include the F435 40A AIO, 140 mm wheelbase, XT30 connector, size 121 GPS compatibility, and supported video systems.
