T-Motor U10II KV100 Multirotor UAV Motor - 10.6kg Max Thrust, IP45, 48V, 1500 Flights

Overview

T-Motor U10II KV100 is an efficiency-focused Multirotor UAV Motor for long-endurance multirotor platforms. The manufacturer states max thrust 10.6 kg (10600 g), 5% longer flight time, and a service life of 1500 flights (40 mins/flight), with additional design highlights including a redesigned iron core, sine wave features, and silver winding.

For compatibility questions or integration support, contact https://rcdrone.top/ or email support@rcdrone.top.

Key Features

• Efficiency increase by 20%+
• 5% longer flight time
• Max thrust: 10.6 kg (10600 g)
• New iron core design
• Imported custom silver wires (manufacturer states reduced copper loss and helps lower motor heat by 30%)
• Motors work at ease in high temperature: centrifugal air-cooling system; operation stated for 50°C environment
• Motor protection for safe flight; IP45; dust resistant & water proof
• New dust prevention network; dust prevention network diameter < 1 mm
• MTBF: about 1000 hours
• Industrial grade features stated: waterproof, dustproof, low noise, large bearings
• Imported custom bearings; dual bearing protection
• Iron core special anti-rust treatment; capability stated for passing 48h salt spray test
• Dual bearing caps stated for anti-rust and anti-corrosion; stated to pass through a 6h salt spray test
• No prop adapter required with 35 g weight reduction; easy installation (tip: do not forget the 2 g location pin during installation)

Specifications

Model / Core Specs

Flight Time / Power Ratio Comparison (48V, Propeller 30x10.5)

PS: Power ratio = ratio of max. thrust and motor weight.

Power / Thrust Chart Values

Magnet Grade Data

N45 UH Magnet Grade: high grade magnets ensures high efficiency in high temperature.

Installation / Hardware Text

What’s Included

• 1x T-Motor U10II Motor KV100
• 1x Hardware pack

Applications

• Long-endurance multirotor UAV platforms
• Surveying and mapping
• Aerial observation and inspection workflows

Matching Guide

• Propeller: T-Motor G30*10.5 (also referenced as G30*10.5" CF prop)
• ESC: ALPHA 60A 12S ESC

Details

The T-Motor U10 II KV100 motor features a compact mounting hub and a single cable lead for clean installation.

Power ratio and key specs compare U10PLUS KV80, U10 KV80, and U10II KV100 at 48V with 30x10.5 propellers.

U10 series thrust and power figures list up to 10.6 kg (10,600 g) max thrust, with power values shown for U10, U10PLUS, and U10II.

T-Motor’s centrifugal air-cooling design promotes efficient heat dissipation for more reliable operation in hot conditions.

T-Motor’s IP45-rated motor protection is designed to resist dust and water for more reliable flights in wet or dusty conditions.

The T-Motor design uses a fine dust-prevention mesh (under 1 mm) to help keep sand and debris out of the motor.

The T-Motor iron core features a special anti-rust treatment rated for a 48-hour salt spray test.

Imported custom bearings and dual bearing protection are designed to improve service life and corrosion resistance, including a 6-hour salt spray test rating.

N45 UH magnet grade is rated for up to 180°C max working temperature with listed remanence, coercive force, and energy product specs.

T-Motor pairs a 30-inch carbon fiber CF Prop with FOC ESC control for smoother, lower-noise operation.

T-Motor’s direct prop mounting design eliminates the need for a prop adapter and includes a 2g location pin for alignment during installation.