Surpass Hobby BAT S2207 S2208 FPV Brushless Motor for 5-Inch FPV Drone Builds
Surpass Hobby BAT S2207 S2208 FPV Brushless Motor for 5-Inch FPV Drone Builds
Surpass Hobby
受取状況を読み込めませんでした
Overview
The Surpass Hobby BAT S2207/S2208 FPV brushless motor is designed for 5-inch FPV drone builds. This series uses a detachable motor structure, an M5 propeller shaft, and a ventilated bell design intended to support cleaning and heat dissipation.
Key Features
- Available in S2207 and S2208 stator configurations.
- N52SH NdFeB rotor magnets and a hollow steel shaft.
- M5 shaft for common FPV propeller mounting.
- NMB bearings.
- 220 C single-strand copper windings.
- 0.15 mm silicon steel laminations.
- Detachable design for access during maintenance.
For assistance selecting a motor configuration for a compatible FPV drone build, contact rcdrone.top.
Specifications
| Series | BAT S2207 / S2208 |
|---|---|
| Motor type | FPV brushless motor |
| Slot / pole configuration | 12N14P |
| Motor diameter | 27.6 mm |
| Shaft diameter | 5 mm (M5) |
| Shaft length | 12.8 mm |
| Mounting pattern | 4-M3 |
| Motor wire | 20 AWG, 130 mm |
S2207
| Stator size | 22 x 7 mm |
|---|---|
| Motor size | 27.6 x 32.1 mm |
| 1950KV maximum tested thrust | 1280 g |
| 1950KV test propeller | TM5143-3 |
S2208
| Stator size | 22 x 8 mm |
|---|---|
| Motor size | 27.6 x 33.1 mm |
| 1950KV maximum tested thrust | 1487 g |
| 1950KV test propeller | TM5146-3 |
Details
The Surpass Hobby BAT S2207/S2208 series is built for 5-inch FPV drone configurations with a distinctive ventilated motor bell.
NMB bearings, 220 C copper windings, and 0.15 mm silicon steel laminations support the motor's construction; listed 1950KV maximum thrust is 1280 g for S2207 and 1487 g for S2208.
The M5 shaft accommodates common FPV propeller mounting, while the included custom nut helps protect the steel shaft threads.
A detachable motor structure provides access for cleaning, and the ventilated bell design is intended to promote heat dissipation.
Related Collections
