RadioMaster SBUS Wireless Trainer Modules (Micro/Nano) for EdgeTX Radios, 5V SBUS Trainer Link
RadioMaster SBUS Wireless Trainer Modules (Micro/Nano) for EdgeTX Radios, 5V SBUS Trainer Link
RadioMaster
픽업 사용 가능 여부를 로드할 수 없습니다.
Overview
The RadioMaster SBUS Wireless Trainer Module is a wireless trainer module designed to link an instructor radio and a student radio without using a trainer cable. It transmits the trainer signal via SBUS for a flexible, cable-free training setup and is configured through the trainer menu in EdgeTX.
Compatibility is based on using a receiver that supports a 5V SBUS serial output. For student radios with built-in ExpressLRS modules, recommended receivers include RadioMaster RP1/RP2. For radios with an internal 4-in-1 multi-protocol module or CC2500 module, the recommended receiver is the RadioMaster R81 V2.
Launch Video
Key Features
- Cable-free trainer setup ("Ditch the cables, experience training with freedom").
- SBUS connection type for trainer signal transmission.
- Quick setup via the trainer menu in EdgeTX.
- Receiver compatibility: works with any receiver that supports a 5V SBUS serial output.
- Two form factors: Micro Module and Nano Module to match different radio module bays.
Specifications
| Item | RadioMaster Sbus Trainer Modules |
| Working Voltage | DC 5.0V - 8.4V |
| Receiver Interface Output Voltage | DC 5.0V |
| Weight | Micro Module: 25.10g; Nano Module: 19.00g |
| Dimensions | Micro: 33*48.7*68mm; Nano: 26.3*71.2*42mm |
| Applicable Models | [Micro] TX16S, BOXER; [Nano] GX12, Zorro, Pocket, MT12 (Not compatible with TX12MKII) |
| Suggested Receivers | RP1, RP2, R81 V2, or any other receiver that supports SBUS output and works with 5V |
Compatible Radios
Micro adapter
- TX16S MKII Series Radio Controller
- Boxer Series Radio Controller
Nano adapter
- GX12 Dual-Band Gemini-X Radio
- Zorro Series Radio Controller
- Pocket Series Radio Controller
- MT12 Surface Radio Controller
What’s Included
- 1 * Wireless Trainer module (Micro or Nano)
- 1 * GH1.25 3pin Receiver Cable
Please note receivers are not included.
Manuals
For installation and setup support, contact support@rcdrone.top or visit https://rcdrone.top/.
Details
Go cable-free for instructor/student training by sending the trainer signal over a 5V SBUS link.
Pair the instructor and student radios without a trainer cable for a cleaner, more flexible setup at the field.
Choose Micro or Nano to match your radio’s module bay and then configure the trainer link from the EdgeTX trainer menu.
Works with any receiver that outputs a 5V SBUS signal, with RP1/RP2 or R81 V2 commonly used depending on your radio.
Key specs at a glance, including 5.0–8.4V working voltage and a 5V SBUS serial output for the trainer signal.
Includes the module in your selected form factor plus a GH1.25 3-pin receiver cable (receiver not included).
Related Collections
