Ga direct naar productinformatie
1 van 6

2× Ovonic 3S 3000mAh 50C 11.1V LiPo Battery Pack Deans-T Plug for RC Planes & 1/10 Crawlers

2× Ovonic 3S 3000mAh 50C 11.1V LiPo Battery Pack Deans-T Plug for RC Planes & 1/10 Crawlers

Ovonic

Normale prijs $67.60 USD
Normale prijs Aanbiedingsprijs $67.60 USD
Aanbieding Uitverkocht
Belastingen inbegrepen. Verzendkosten worden berekend bij de checkout.
Alle details bekijken

Overview

Ovonic 3S LiPo battery pack set (2 packs) with 3000mAh capacity and 11.1V nominal voltage, designed for smaller RC aircraft and 1/10 scale RC cars such as crawlers and trucks. Each pack uses a Deans-T (T-plug) discharge connector and a JST-XH balance connector for 3S charging.

Key Features

  • 3S1P configuration, 11.1V nominal, 50C continuous discharge (100C max burst).
  • Deans-T discharge plug with solid copper wire (as labeled).
  • Manufacturer-stated performance figures: cycle life up to 350+ times, energy density 128 Wh/L, micro internal resistance < 5 mΩ.

For product selection help and charger/connector questions, contact [email protected] or visit https://rcdrone.top/.

Specifications

Brand Ovonic
Chemistry Li-polymer
Capacity 3000mAh
Voltage 11.1V
Cell count / configuration 3S / 3S1P
Discharge rate 50C
Max burst discharge rate 100C
Balance (charge) plug JST-XH (JST-XHR-4P labeled)
Discharge plug Deans-T Plug
Dimensions (L x W x H) 105 mm x 32 mm x 28 mm (4.13 in x 1.26 in x 1.10 in)
Net weight (deviation 20 g) 380 g total (190 g for one pack); 193 g weight shown for one pack
Energy density (stated) 128 Wh/L
Micro internal resistance (stated) < 5 mΩ
Cycle life (stated) 350+ times

What's Included

  • 2× Ovonic 3S 11.1V 3000mAh 50C LiPo Battery Pack with Deans-T plug
  • 1× User Manual
  • 2× Ovonic brand stickers
  • 1× Packaging box

Applications

  • Smaller RC aircraft and RC planes
  • 1/10 scale RC cars, including RC crawlers and RC trucks
  • Example models mentioned: Eflite Convergence VTOL; TRA Bandit

Charging & Use Notes

  1. Compatibility depends on matching battery voltage and connector type.
  2. Stop charging immediately when any cell reaches 4.2V (normal cell voltage is between 3.7V and 4.2V).
  3. Inspect the battery surface and check voltage before first use.
  4. If a new battery does not hold a full charge, use a balance charger and cycle it several times.

Video

Details