• Front view of the Axisflying Argus H743 Mini flight controller with USB-C port, dual connectors, and labeled solder pads.
  • Duplicate front rendering of the Argus H743 Mini flight controller showing the USB-C port, board connectors, and labeled pads.
  • Rear side of the Argus H743 Mini flight controller showing gold solder pads, USB-C port, boot button, and pad labels.
  • Angled rear view of the Argus H743 Mini flight controller showing the central processor, boot button, and labeled edge pads.
  • Angled front view of the Argus H743 Mini flight controller with USB-C port, two board connectors, and H743Mini V1.0 marking.
  • Angled underside view of the Argus H743 Mini flight controller with USB-C connector, boot button, processor, and solder pads.
  • Argus Mini H743 flight controller render beneath a Chinese headline, showing the underside processor, boot button, and USB-C port.
  • Argus Mini H743 FC shown beneath the headline “Small Size, Uncompromised Performance” with underside components and USB-C port.
  • Argus Mini H743 board connection panel labeling GPS, RX, VTX, servo, LED, and buzzer, plus 5V/2A and 12V/2A BEC text.
  • Dimension diagram of the Argus H743 Mini flight controller showing 29.61 mm width, 28 mm height, and 6.3 mm thickness.
1 10

Axisflying Argus H743 Mini Flight Controller, STM32H743, 4–8S, 6 UARTs

Axisflying Argus H743 Mini Flight Controller, STM32H743, 4–8S, 6 UARTs

AxisFlying

$94.46 USD
$94.46 USD
W promocji Wyprzedane
Z wliczonymi podatkami. Koszt wysyłki obliczony przy realizacji zakupu.
Version
  • PayPal
  • Visa
  • Mastercard
  • American Express
  • JCB
  • Discover
  • Diners Club
  • Google Pay
  • Apple Pay
Pokaż kompletne dane

Overview

The Axisflying Argus H743 Mini is a 4–8S flight controller built around an STM32H743 MCU. It has six UARTs, USB support, 16MB flash memory for Blackbox, an ICM-42688P gyroscope, a DPS368 barometer, and support for OSD, GPS, servo motor, LED and buzzer connections.

The board is specified for 3–5 inch mainstream models and is presented for racing, freestyle, long-range and tight builds. Its compact size is stated to free internal space in tight builds; long-range use is stated to support GPS, VTX and other peripherals.

Features

  • STM32H743 processor running at 480MHz.
  • Six UARTs for peripheral expansion.
  • 16MB flash memory with Blackbox support.
  • Dual BEC outputs listed as 12V/2A and a 5V output; the supplied sources conflict on the 5V output current rating.
  • Controllable, switchable 12V/2A BEC output for VTX and other devices.
  • Supports M1–M4, OSD, GPS, servo motor, LED and buzzer functions.
  • Firmware target: AXISFLYINGH743MINI.

Specifications

Model Argus H743 Mini FC
Main MCU STM32H743
Processor speed 480MHz
Firmware name AXISFLYINGH743MINI
Gyroscope ICM-42688P
Barometer DPS368
Flash memory 16MB
USB Supported
UARTs 6
Input voltage 4–8S
BEC output 12V/2A; 5V output current is conflicting in the supplied source material
Motor outputs M1–M4
Supported functions OSD, GPS, servo motor, LED and buzzer
Mounting-hole spacing 20.5 × 20.5mm
Overall dimensions 28 × 28 × 6.3mm
Weight 5g

Connections and Installation Notes

  • 4-in-1 ESC pads: M1, M2, M3, M4, TLM, CUR, BAT and GND.
  • Camera pads: 5V, GND and CAM.
  • Analog VTX pads: DATA, GND, VTX and VIDEO.
  • Receiver pads: RX, TX, 5V and GND.
  • GPS connections include GPS, SCL and SDA.
  • HD-system wiring is labelled for DJI O4 Air Unit, Avatar HD and Vista/Link.
  • SCL and SDA do not need to be connected when using GPS without a magnetometer.
  • Confirm the interface definition is correct before soldering.
  • ELRS receivers are recommended.
  • When DJI Sky is used, some ELRS receivers may not be recognized by flight controllers. If this occurs, disconnect the Sky Cable SBUS signal cable from the flight controller.
  • Disconnect SBUS (R2) when not using the DJI FPV Controller.

Applications

  • 3–5 inch mainstream models.
  • Racing builds, described as providing quick response for high-speed racing quads.
  • Freestyle builds, described as providing power to throw it around.
  • Long-range builds using GPS, VTX and other peripherals.
  • Tight builds where the mini size can free internal space.

What's Included

  • 1 × Argus H743 MINI FC
  • 1 × Argus H743 MINI FC common manual
  • 1 × packaging box
  • 4 × orange M2 silicone damping standoffs
  • 4 × M3 silicone damping standoffs
  • 1 × stack connection cable
  • 1 × HD VTX connection cable
  • 1 × receiver connection cable
  • 1 × analog camera connection cable
  • 1 × GPS connection cable

Visual Details

Product Views

Axisflying Argus Mini H743 flight controller front view with H743 MCU, six UARTs and dual BEC outputs
The Argus Mini H743FC uses an H743 MCU. The Argus Mini H743FC provides 6 UARTs.

Interfaces and Connections

Argus Mini H743 flight controller processor, expansion interfaces and dual-BEC feature graphic
The H7CORE processor is an STM32H743 running at 480MHz. The Argus Mini H743FC uses an ICM-42688P gyroscope.

Dimensions and Construction

Argus Mini H743 flight controller dimensions and 3–5 inch build applications
The Argus Mini H743FC is stated to cover 3–5 inch mainstream models. The illustrated board footprint measures 29.61mm by 28mm, with a 6.3mm thickness.

Setup and Use

Argus Mini H743 flight controller wiring diagram for ESC, camera, VTX, GPS, receiver and HD systems
The wiring diagram labels a 4-in-1 ESC connection with M1, M2, M3, M4, TLM, CUR, BAT and GND pads. The wiring diagram labels camera connections for 5V, GND and CAM.

Specifications and Performance

Argus Mini H743 flight controller specification table
The firmware name is AXISFLYINGH743MINI. The gyroscope is ICM-42688P.
Argus Mini H743 flight controller on a scale reading 5.0 grams
The Argus Mini H743FC is shown weighing 5.0g.

Package Contents

Axisflying Argus H743 Mini flight controller with included cables, standoffs and manual
The package includes 1 Argus H743 MINI FC. The package includes an Argus H743 MINI FC common manual.

Related Collections