RATEFPV Snap X5 5-Inch Freestyle ELRS FPV Drone PNP, DJI O4 Compatible, 65A ESC
RATEFPV Snap X5 5-Inch Freestyle ELRS FPV Drone PNP, DJI O4 Compatible, 65A ESC
RATEFPV
Nie można załadować gotowości do odbioru
Overview
The RATEFPV Snap X5 is a 5-inch freestyle ELRS FPV drone platform built for modular customization, fast maintenance, and flexible installation. The PNP version does not include a VTX or camera, and is compatible with DJI O4, DJI O4 Wide, and DJI O4 Pro air units when installed with the appropriate configuration.
Its modular architecture supports quick replacement of major components, while the wide X-frame layout provides 155° FOV clearance for reduced propeller obstruction. The platform is suited to freestyle flying, cinematic lines, and custom FPV builds.
Key Features
- Fully modular design for faster component replacement, repair, and upgrades.
- 2-second quick-release modular aerial unit system for tool-free equipment changes.
- CNC frame structure with TPU reinforcement for added impact resistance.
- Quick-release arms for simplified maintenance and replacement.
- Wide X geometry with 155° FOV clearance and reduced propeller interference.
- Expandable side mounting points for accessories and custom installations.
- Modular GPS mount with an 18 x 18 mm mounting size.
- Dual cable tie battery retention at the front and rear to help prevent battery movement.
- Nylon side panels using a sintering process for accessible maintenance.
Specifications
| Product type | 5-inch freestyle ELRS FPV drone |
|---|---|
| Frame | JEXN Snap X5 |
| Wheelbase | 232 mm |
| Overall dimensions | 217 x 217 mm |
| Motor | RATE 2207.5 1950KV |
| Flight controller | RATE F435 288MHz |
| ESC | RATE 65A |
| Gyro | ICM 42688-P |
| OSD chip | RATE MSP OSD |
| Blackbox | 16MB |
| Bluetooth | Supported |
| Propeller | GEMFAN51466V2 |
| Battery connector | XT60 |
| Maximum battery size | 85 x 45 x 45 mm |
| Input voltage | 6S LiPo / LiHV |
| Suggested battery capacity | 1050-1650mAh |
| Flight time | 12 min with 6S 1750mAh |
| GPS mount size | 18 x 18 mm |
| Top plate thickness | 2.5 mm |
| Bottom plate thickness | 3 mm |
| Arm thickness | 6.0 mm |
| Video system | VTX and camera not included; compatible with DJI O4, DJI O4 Wide, and DJI O4 Pro |
Compatibility and Installation Notes
The DJI O4 and O4 Wide installations require the Snap X5 ELRS PNP version with the O4 Wide installation CNC case and parts, or the applicable 145° FOV wide-angle lens set. DJI O4 Pro installation does not require the lens set.
For DJI O4 and O4 Pro batches made after February 2026, the upgraded internal IMU gyro may be highly sensitive to FPV drone vibration. Enabling RockSteady can cause heavy video jitter. Disable air unit stabilization before recording and use flight controller gyro data with Gyroflow for post-stabilization.
For product support and installation questions, contact RCDrone customer service.
Details
The RATEFPV Snap X5 combines a 5-inch freestyle platform with an all-round modular design for easier assembly and maintenance.
The modular aerial unit supports quick equipment changes, while reinforced construction, accessory mounting points, and a GPS mount support custom builds.
Nylon side panels provide accessible maintenance, while dual cable-tie retention points help keep the battery secure during flight.
Quick-release arms simplify maintenance, with RATEFPV motors and a 65A ESC flight stack completing the modular platform.
The wide X-frame layout provides 155-degree field-of-view clearance to reduce propeller obstruction for freestyle and cinematic flying.
The Snap X5 measures approximately 217 by 217 millimeters overall, with a 232-millimeter wheelbase.
