Flywoo FlyLens 85 HD HDZero 2S Brushless Whoop FPV drone V1.3, HDZero Whoop Lite VTX

Overview

The Flywoo FlyLens 85 HD HDZero 2S Brushless Whoop FPV drone (V1.3) is a compact, lightweight 2-inch platform built around the HDZero digital FPV system. It features a high-strength PC injection-molded protective ring, a three-point CNC camera damping platform, and a quick-release structure for easier maintenance.

For setup questions or parts support, contact https://rcdrone.top/ or email support@rcdrone.top.

Key Features

• HDZero digital FPV system: HDZero Whoop Lite VTX with MIPI 80mm cable + HDZero Micro V2 camera (supports 4:3 and 16:9).
• Three-point CNC camera damping platform designed to reduce jelly effect and improve video stability.
• High-strength PC injection-molded protective ring; embedded neon light strip (remote-control switch).
• Quick-release upper/lower structure; frame fixed with four screws for easier separation and maintenance.
• Battery quick-release design with two reserved fixing-hole positions to adjust center of gravity.
• Reverse thrust (reverse push propeller) structure for stable flight and improved endurance; bottom-mounted VTX compartment for protection and heat dissipation.
• Carbon fiber frame with black carbon surface treatment; reserved holes for action camera mounting; optional 12mm GPS mounting kit noted.
• GPS expansion is supported via an optional Goku GM10 Nano V3 GPS module (default version does not include GPS; installation requires DIY soldering/installation).

Specifications

Version Notes (V1.3)

• V1.3 frame kit changes (2024-04-10): support added for 9mm x 9mm motor mounting holes; reinforced camera mounting holes on the bottom plate; optimized width between motor mounting holes and the periphery; original Micro-USB port compatible with Type-C; HD VTX bracket uses new, tough materials.
• GOKU F405 HD 1-2S ELRS AIO V2 (42688) notes: 9V BEC added to address unexpected shutdown in low-voltage state; electronic switch added to turn off O3 air unit during Betaflight tuning (for O3-equipped builds) to reduce overheating risk; Type-C interface added.

What’s Included

• FlyLens 85 x1
• 2S 750mAh TPU mount x1
• 2S 1000mAh mount x1
• Propeller x4
• Gasket x2
• Locknut x2
• Shock absorbing balls x2
• Clip x4
• Hex nut x2
• Hexagonal stud x2
• M1.4 x 3.5mm screws x12
• M1.6 x 6mm screws x4
• M2 x 3mm (rhs) screws x2
• M2 x 6mm (rhs) screws x1
• M2 x 10 (Flat Head) screws x2
• M2 x 10 (rhs) screws x2
• M2 x 12 (Flat Head) screws x2
• M2 x 18 (Flat Head) screws x2

Applications

• HDZero digital FPV flying (training and general FPV use)
• Compact indoor/outdoor flights with prop-guarded whoop-style protection
• Action camera mounting supported via reserved mounting holes (compatible cameras listed: Insta360 GO1/GO2/GO3, RunCam Thumb, RunCam Thumb Pro, Hawkeye Thumb)

Manuals

FlyLens 85 drone resources / download center (operation guide, installation guides, CLI, and STL downloads): https://flywoo.net/page/flylens-85-drone-download-center

Details

Flywoo FlyLens 85 features a high-strength PC protective ring, quick-release structure, and a three-point camera damping platform.

The FlyLens 85 HDZero whoop is designed for an ultra-light takeoff weight of 80–130g depending on the version.

The FlyLens 85 HD build pairs a GOKU F405 AIO flight controller (2S, 12A) with 1003 motors, an ICM42688 gyro, and built-in ELRS receiver support.

FlyLens 85 HD supports multiple FPV video systems, including HDZero, for flexible digital or analog setups.

The three-point CNC damping camera mount uses rubber isolators to help reduce vibration reaching the lens during flights.

The FlyLens 85 features a high-strength PC protective ring with an embedded colorful neon light strip for added protection and visibility.

The quick-release frame uses only four screws for easy maintenance, and the battery mount offers front/back holes to adjust the center of gravity.

The FlyLens 85 HD whoop uses a reverse-thrust layout with a downward VTX module compartment designed for protection and improved heat dissipation.

The FlyLens 85 frame includes three fixed action-camera mounting holes and supports Insta360 GO 1/2/3, Runcam Thumb/Thumb Pro, and Hawkeye Thumb.

The FlyLens 85 can be upgraded with a Goku GM10 Nano V3 GPS module using its available external serial ports.

The FlyLens 85 HDZero configuration pairs an F405 1–2S 12A AIO, MPU6000 gyro, and HDZero Whoop Lite VTX with an HDZero Micro V2 camera.

FlyLens 85 HD Zero is listed at 72.3 g (no battery) with 7:00–9:00 flight time and 25–27% takeoff thrust on 2S 1000mAh packs.

The FlyLens 85 package includes TPU battery mounts, four propellers, gaskets, nuts, clips, shock-absorbing balls, and assorted M1.4/M2 screws.

The FlyLens 85 whoop frame measures about 128 × 128 mm with an overall height around 55 mm for easier fit planning.