Overview
The iFlight Nazgul Evoque F7 O4 6S HD is a 7-inch FPV drone built on a Deadcat (DC) geometry frame to help keep propellers out of the camera view for cleaner cinematic footage. It comes equipped with the DJI O4 Air Unit Pro video transmission system and a sealed waterproof design intended to help protect internal components from splashes and short-term water contact (water resistance is non-permanent and may diminish with wear).
Key Features
- Sealed waterproof design to help protect against splashes and short-term water contact; avoid high-pressure water and prolonged submersion, and do not open/modify the interior to preserve sealing.
- Pre-shipment testing performed on each unit before shipment.
- Deadcat (DC) geometry for reduced prop obstruction in recorded footage.
- Optional ELRS dualband dual-antenna receiver support (2.4GHz + 900MHz) with dual-antenna layout for omnidirectional signal reception.
- Upgraded Borg Stack with built-in anti-spark filter, dual independent BEC power (12V 2A with VTX switch + 5V 25A), and built-in polymer capacitor.
- Fin-shaped cooling channel for improved heat dissipation, plus dynamic LED effects.
- DJI O4 Air Unit Pro recording capability with 1/1.3-inch image sensor and 155° FOV lens; supports 4K recording and 1080p/100fps live view (details in specs).
Specifications
| Product Name | Nazgul Evoque F7 O4 6S HD |
| Geometry | Deadcat (DC) |
| Flight Controller (FC) | Borg Mini F7 Flight Controller |
| ESC | Borg 60R ESC |
| Video Transmission | DJI O4 Air Unit Pro |
| Frame | 321mm wheelbase |
| Motors | XING2 2809 1250KV motors |
| Propellers | HQ 7.5X3X3 propellers |
| Weight | 765 +/- 5g (without battery) |
| Takeoff Weight | Approx. 1620 +/- 5g (incl. 21700 6S 10000mAh) |
| Dimensions (L x W x H) | 284*283*53mm |
| Max Speed | 140km/h |
| Maximum Takeoff Altitude | 7000 m |
| Max Hover Time | Approx. 25min with 6S 8000-10000mAh battery (no load) |
| Recommended Load | 800g |
| Operating Temperature Range | -20° to 40° C |
| Antennas | Dual antennas |
| GNSS | GPS + SBAS + Galileo + QZSS + Glonass |
| Battery Plug | XT60 |
Video Transmission (DJI O4 Air Unit Pro) Specifications
| Product Name | DJI O4 Air Unit Pro |
| Image Sensor | 1/1.3-inch |
| Lens | FOV: 155° |
| ISO | 100-25600 |
| Video Resolution | 1080p/100fps H.265 |
| Video Format | MP4 |
| Max Video Bitrate | 130Mbps |
| Color Mode | Normal Mode / D-Log M |
| Stabilization | RockSteady 3.0+ (When RockSteady is enabled, the shooting angle only supports standard.) |
| Live View Quality | 1080P@100fps |
| Operating Frequency | 5.170-5.250 GHz & 5.725-5.850 GHz |
| Transmitter Power (EIRP) | 5.1GHz < 23dBm (CE) / 5.8GHz < 33dBm (FCC) / < 14dBm (CE) / < 30dBm (SRRC) |
| Max Video Transmission Range | With DJI Goggles 3 / DJI Goggles N3: 15 km (FCC), 8 km (CE), 8 km (SRRC) |
| Communication Bandwidth | Max 60 MHz |
| Antenna | Dual antennas |
| Built-in Storage | 4GB |
| Supported SD Cards | microSD (up to 512GB) |
| Operating Temperature | -10° to 40° C |
| Weight | Air Unit (camera module included): Approx. 32 g |
| Dimensions | Transmission Module: 33.5 x 33.5 x 13 mm (L x W x H) |
What’s Included
- 1 x Nazgul Evoque F7 O4 6S HD
- 1 x Battery pad
- 2 x 7.5 inch Prop (Pairs)
- 2 x Battery strap
Notes
- This product is for recreational use and does not support autonomous flight.
- The BNF package does not include the remote control, goggles, action camera, battery, or charger; these must be purchased separately for compatible use.
- For iFlight export policy information, refer to: https://shop.iflight.com/Export-Policy-info
- In case of crash damage, maintenance advice, spare parts, or replacement options may be available; due to the waterproof seal, some internal repairs may be restricted.
For product setup questions, parts compatibility, or after-sales assistance, contact support@rcdrone.top or visit https://rcdrone.top/.
Related Collections
