2× Ovonic Rebel 2.0 6S 1300mAh 120C LiHV LiPo Battery Pack 22.8V XT60 for 5–6in FPV Drones

Overview

This 2-pack Ovonic Rebel 2.0 LiHV LiPo battery pack is built for 6S FPV drone setups that need a compact 1300mAh pack with high discharge capability. Each pack is rated at 22.8V, 120C continuous (240C burst), and comes pre-wired with an XT60 discharge plug plus a JST-XHR-7P balance/charge plug—commonly used on 5–6 inch freestyle and racing FPV drones.

Key Features

• 6S LiHV power system: 22.8V, 6S1P configuration for 6S builds.
• High discharge rating: 120C continuous discharge rate (240C max burst) for demanding throttle response.
• FPV-ready wiring: XT60 discharge plug, JST-XHR-7P balance/charge plug, 12AWG wire.
• Compact size for tight builds: 76 x 28 x 47 mm (2.99 x 1.10 x 1.85 inches) per pack.
• Manufacturer-stated cell construction benefits: Ovonic compares “stacking technology” vs “winding technology” with +6% higher energy density, +12% longer running time, -8% lower battery swelling, and -4% lower internal resistance.

Specifications

What's Included

• 2 x Ovonic Rebel 2.0 120C 1300mAh 22.8V 6S LiHV LiPo Battery with XT60 plug
• 2 x Brand stickers
• 1 x User manual
• 1 x Packaging box

Applications

• 180–330mm brushless FPV drones, including 5–6 inch drones
• Examples mentioned: GEPRC MARK5, MARK4, Crocodile5 Baby, DJI FPV, Nazgul5, TITAN XL5, Chimera5, Evoque F5D/F5X, Nazgul Evoque F6X/F6D
• Also used in other RC models when voltage, dimensions, and plug match (airplane, boat, car, truck, helicopter, multicopter, UAV/aerial models, DIY builds)

Charging & Safety Notes

1. Use an RC LiPo balance charger and confirm the charger supports the correct battery type and cell count.
2. Ensure compatibility with both voltage and plug specifications for proper fit.
3. Cease charging immediately upon reaching 4.2V per cell (normal voltage range stated: 3.7V~4.2V).
4. Inspect battery condition before each use.
5. If a new battery does not hold a full charge or loses charge rapidly, use a balance charger and cycle it several times.

For product selection help or after-sales support, contact [email protected] or visit https://rcdrone.top/.

Details

Built for compact 6S FPV builds, each 22.8V 1300mAh pack uses an XT60 discharge plug plus a JST‑XHR‑7P balance lead with 12AWG wire.

Ovonic highlights performance-focused cell characteristics across energy density, discharge capability, cycle life, safety, and internal resistance.

Manufacturer-stated stacking cell construction is compared with winding construction for energy density, runtime, swelling control, and internal resistance.

The 2-pack includes two Rebel 2.0 6S LiHV packs, brand stickers, a user manual, and the retail packaging box.

Beyond 5–6 inch FPV drones, the same voltage and plug setup can suit other RC models when size and connector requirements match.