MAD 4008 IPE Drone Motor 380KV/600KV

Overview

MAD 4008 IPE is a drone motor available in 380KV and 600KV variants for multi-rotor platforms. It is specified for 14–18 in high-load carbon fiber propellers, with a stated payload capacity of 700–1300 g per rotor and a maximum thrust rating up to 2700 g (2.7 kg) per rotor (model-dependent configuration).

Key Features

• Integrated centrifugal heat dissipation: YES
• Protection rating: IP35
• High-temperature ratings: varnished wire 150°C; magnet 150°C
• Balance specs: rotor balance ≤5 mg; motor balance ≤10 mg
• Mounting: propeller mounting holes D:12 M3×4; motor mounting holes D:25 M3×4
• Anticorrosive stator

Specifications

380KV (Industry Professional Edition)

• Recommended hover thrust: 1.0–1.5 kgf
• Maximum thrust: 2.7 kgf
• Efficiency: >81%
• Nominal voltage: 6S lipo battery
• No load current: 0.6A / 20V
• Internal resistance: 149mΩ
• Maximum current: 19.7 A
• Maximum power: 468 W
• Maximum torque: 0.57 Nm
• Recommended ESC: MAD AMPX PRO 40A (2–6S)
• Recommended propellers: 15x5.0, 16x5.4, 17x5.8, 18x6.1
• Single rotor take-off weight: 1 kg–1.5 kg
• UAV take-off weight: 6S-17" / 4kg-Quadcopter; 6kg-Hexacopter; 8kg-Octocopter
• Product boxed weight: 346.4g (110 x 110 x 55 mm) 2pcs/box

Test note (380KV): data measured at 24 V input, 25°C, sea level; rotational speed adjusted by throttle. With no additional cooling, current over 20A is a non-working zone; 20A is a short-term (about 10–30 s) working zone; below 17A is a sustainable working zone.

600KV (Industry Professional Edition)

• Recommended hover thrust: 0.5–1 kgf
• Maximum thrust: 2.2 kgf
• Efficiency: >78%
• Nominal voltage: 4S lipo battery
• No load current: 1.3A / 20V
• Internal resistance: 54mΩ
• Maximum current: 23.8 A
• Maximum power: 371 W
• Maximum torque: 0.39 Nm
• Recommended ESC: MAD AMPX PRO 40A (2–6S)
• Recommended propellers: 14x4.8, 15x5.0
• Single rotor take-off weight: 0.5 kg–1 kg
• UAV take-off weight: 4S-15" / 4kg-Quadcopter; 6kg-Hexacopter; 8kg-Octocopter
• Product boxed weight: 346.6g (110 x 110 x 55 mm) 2pcs/box

Test note (600KV): data measured at 16 V input, 25°C, sea level; rotational speed adjusted by throttle. With no additional cooling, current over 24A is a non-working zone; 24A is a short-term (about 10–30 s) working zone; below 9A is a sustainable working zone.

What's Included

• Motor x2
• Propeller Plate x2
• 3.5mm Bullet Connector x6
• Ø4–6 Adapter Ring x2
• Heat Shrinkable Tube x6
• M3*6 Motor Screws x8
• M3*10 Propeller Screws x4
• Sticker x2

For compatibility checks (KV selection, prop size, ESC matching) and order support, contact support@rcdrone.top or visit https://rcdrone.top/.

Accessories & Drawings

380KV Datasheet Image

600KV Datasheet Image

Details