Ovonic 450mAh 3S 11.1V 80C LiPo Battery Pack (4PCS) XT30 for 80-130mm Micro FPV Drones

Name: Ovonic 450mAh 3S 11.1V 80C LiPo Battery Pack (4PCS) XT30 for 80-130mm Micro FPV Drones
Brand: Ovonic
SKU: O-80C-450-3S1P-XT30-4P-1
Price: 40.74 USD
Availability: InStock

Ovonic 450mAh 3S 11.1V 80C LiPo Battery Pack (4PCS) XT30 for 80-130mm Micro FPV Drones

Ovonic

$40.74 USD

Rea Slutsåld

Skatter ingår. Frakt beräknas i kassan.

Kvantitet

Visa alla uppgifter

Overview

The Ovonic 450mAh 3S 11.1V 80C LiPo battery pack (4-pack) with XT30 plug is designed for 80–130mm micro FPV drones and other compatible RC models. It uses a 3S1P configuration and is specified with an 80C continuous discharge rate and 160C max burst discharge rate. The pack includes an XT30 discharge connector and a JST balance connector (type noted below), and the product description states it can draw up to 30A.

Key Features

3S1P LiPo battery pack: 11.1V, 450mAh
Discharge rating: 80C continuous; 160C max burst (listed)
Connector setup: XT30 discharge plug; JST balance plug (listed as JST-XH; shown as JST-XHR-4P)
Wire spec shown: 16 AWG
Label marking shown: 5.0Wh
Manufacturer comparison graphics state: higher energy density +6%, longer running time +12%, lower battery swelling -8%, lower internal resistance -4% (vs “others”)

Specifications

Brand	Ovonic
Chemistry	Li-polymer (LiPo)
Configuration	3S1P
Nominal Voltage	11.1V
Capacity	450mAh
Discharge Rate (continuous)	80C
Max Burst Discharge Rate	160C (listed)
Energy	5.0Wh (shown on label)
Discharge Plug	XT30 Plug
Balance/Charge Plug	JST-XH (listed); JST-XHR-4P (shown)
Wire	16 AWG (shown)
Dimensions	50.5 x 25 x 14 mm (listed); 44.1 x 24.7 x 20.3 mm / 1.74 x 0.97 x 0.80 in (shown)
Weight	134.4g total / 33.6g per pack (listed); 41g per pack / 0.08 lb (shown)

Compatibility / Applications

Stated application: 80–130mm size FPV
Examples listed: Eachine Lizard95 FPV Racer, GT-Rabbit R239, GT-Rabbit R249
General RC fitment guidance shown: match voltage, dimensions, and plug for the RC model

What’s Included

4 x Ovonic 450mAh 3S 11.1V 80C LiPo Battery Pack (XT30)
1 x User Manual
Packaging box x1 (shown)
Brand stickers x2 (shown)

Charging & Safety Notes

Battery fit depends on matching voltage and connector type.
Stop charging immediately when any cell reaches 4.2V (normal cell voltage: 3.7V to 4.2V).
Before use, check the battery surface condition and verify voltage is normal.
If a new battery does not hold a full charge or loses charge quickly, use a balance charger and cycle it several times.

For product selection help (connector, voltage, or sizing) or order support, contact [email protected] or visit https://rcdrone.top/.

Details

Ovonic 450mAh 3S 11.1V 80C LiPo battery with XT30 plug, JST-XHR-4P balance lead and size/weight callouts

Built for 80–130mm micro FPV setups, the 3S1P 11.1V 450mAh pack pairs an XT30 discharge plug with a JST balance connector for reliable charging.

Ovonic vs others radar chart comparing energy density, discharge capacity, cycle life, safety and internal resistance

Stacking vs winding technology comparison highlighting +6% energy density, +12% runtime and reduced swelling/internal resistance

Performance-focused cell construction is highlighted with claimed gains in energy density and runtime, plus reduced swelling and internal resistance versus typical packs.