ZYE 6S HV 23.7V 16000mAh 5C Solid State LiPo Battery – 379.2Wh, 269Wh/kg

Overview

The ZYE 6S HV 23.7V 16000mAh Solid State LiPo Battery is a high-capacity, high-energy-density battery designed for long-endurance UAVs, industrial drones, VTOL aircraft, fixed-wing platforms, robotics, and other demanding electric systems.

Using high-voltage solid-state lithium battery technology, this pack provides a 23.7V nominal voltage, 16000mAh capacity, and approximately 379.2Wh of nominal energy. Its specific energy reaches approximately 269Wh/kg, providing substantial stored energy while keeping the pack weight at around 1410g.

The battery supports a 5C continuous discharge rate of up to 80A and a 10C peak discharge rate of up to 160A for no more than 2 seconds.

Key Features

High Energy Density

With a specific energy of approximately 269Wh/kg, the battery offers a strong energy-to-weight ratio for aircraft and mobile systems where endurance and payload efficiency are important.

6S High-Voltage Configuration

The battery uses a 6S HV configuration with:

• Nominal voltage: 23.7V
• Maximum charging voltage: 26.7V
• Nominal energy: 379.2Wh
• Recommended safe discharge voltage: 21V

High Continuous and Peak Current Output

The battery supports:

• 5C continuous discharge
• 80A maximum continuous current
• 10C peak discharge
• 160A peak current for up to 2 seconds

This output capability is suitable for takeoff, acceleration, maneuvering, and short-duration high-load conditions.

Compact High-Capacity Design

The battery measures approximately 125 × 77 × 74mm and weighs around 1410g, offering a large 16000mAh capacity in a compact rectangular form.

Flexible Charging Options

The manufacturer specifies the following charging currents:

• Standard charging current: 8A
• Fast charging current: 16A
• Maximum charging current: 32A

A compatible 6S HV balance charger and suitable charging cables are required.

Wide Operating Temperature Range

The specified operating ranges are:

• Charging temperature: 10°C to 45°C
• Discharge temperature: -10°C to 65°C

Specifications

What’s Included

• 1 × ZYE 6S HV 16000mAh Solid State LiPo Battery
• 1 × Preinstalled main power cable and connector
• 1 × Preinstalled 6S balance connector

Applications

This battery is suitable for:

• Long-endurance multirotor drones
• Industrial inspection UAVs
• Mapping and surveying aircraft
• VTOL aircraft
• Fixed-wing UAVs
• Agricultural drone systems
• Delivery and logistics drones
• Mobile robots
• Unmanned ground vehicles
• Custom 6S high-voltage electric systems

Charging and Usage Notes

• Use only a charger compatible with 6S HV lithium batteries.
• The maximum charging voltage is 26.7V, equivalent to 4.45V per cell.
• A standard 6S LiPo charger limited to 4.20V per cell will not fully charge this battery.
• Confirm that the ESC, motor, power distribution board, voltage regulator, connectors, and other electronics support a fully charged voltage of 26.7V.
• Do not exceed the specified 80A continuous current.
• The 160A peak current is limited to no more than 2 seconds.
• The recommended safe discharge voltage is 21V. Avoid discharging below the manufacturer’s specified limit.
• Use 8A standard charging for routine charging. Higher charging currents require a compatible charger, cables, connectors, and proper temperature monitoring.
• Charge only within the specified temperature range of 10°C to 45°C.
• Always use balance charging and monitor the battery during charging.
• Do not charge or use a swollen, punctured, damaged, leaking, or overheated battery.
• Store the battery in a cool, dry, fire-resistant location.

Voltage clarification: 23.7V is the nominal voltage, while 26.7V is the fully charged voltage.