Ruka hadi maelezo ya bidhaa
1 ya 7

Ovonic Force 6S 1300mAh 130C 22.2V LiPo Battery 2-Pack XT60 for FPV Racing Drones & EDF Jets

Ovonic Force 6S 1300mAh 130C 22.2V LiPo Battery 2-Pack XT60 for FPV Racing Drones & EDF Jets

Ovonic

Regular price $47.28 USD
Regular price Sale price $47.28 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
View full details

Overview

The Ovonic Force 6S 1300mAh LiPo battery pack is a high-discharge RC battery designed for FPV racing and other high-power RC models that use an XT60 connector. With a 22.2V (6S1P) configuration and 130C discharge rating, it is suited for demanding throttle response on compact FPV builds.

Key Features

  • High discharge output: 130C discharge rate (up to 260C max burst listed) for high-load setups.
  • 6S power system: 22.2V (6S1P) configuration for 6S-capable FPV and RC platforms.
  • Connector set: XT60 discharge plug and 7-pin balance connector (labeled JST-XH-7P / JST-XHR-7P).
  • Compact pack size: Approx. 76.1 x 38.4 x 35.8 mm.

Specifications

Brand Ovonic
Chemistry Li-polymer
Configuration 6S1P
Battery voltage 22.2V
Capacity 1300mAh
Energy 28.86Wh
Discharge rate 130C
Max burst discharge rate 260C
Discharge plug XT60
Balance/charge plug JST-XH-7P (also labeled JST-XHR-7P)
Wire gauge 12AWG (labeled)
Battery dimensions 76.1 x 38.4 x 35.8 mm (3 x 1.51 x 1.41 inch)
Net weight 195 g per pack (0.43 lb); deviation listed: 20 g
Listed size deviation Length dev. 5 mm; width dev. 2 mm; height dev. 2 mm

What's Included

  • 2 x Ovonic Force 6S 1300mAh LiPo battery (22.2V, 130C) with XT60
  • 1 x User manual
  • 1 x Wrapped box
  • 2 x Brand stickers

For product selection or connector questions before purchase, contact [email protected] or visit https://rcdrone.top/.

Applications

  • FPV racing and freestyle drones (listed as working well on powerful 3-inch and 4-inch copters)
  • High-speed drones and EDF jets (as titled)
  • Also shown as suitable for RC airplane, boat, RC car, vehicles, and trucks when voltage, dimensions, and plug match

Charging & Safety Notes

  • Only use if the voltage and connector match the model.
  • Stop charging immediately when any cell reaches 4.2V (normal cell voltage: 3.7V to 4.2V).
  • Check the battery surface condition and verify voltage before first use.
  • If a new battery will not hold a full charge or loses charge quickly, use a balance charger and cycle several times.

Video

Details