HGLRC 5-12V BEC Step-Down Module, 8.4-28V Input, 5V/12V 2A Output, RC Channel On/Off

Overview

HGLRC 5-12V BEC is a BEC step-down module with two-mode voltage switching. It supports an 8.4V028V wide input range and provides regulated 5V or 12V output, with remote-control channel support to switch the BEC module on/off.

Key Features

• Supports soldering or wiring terminal connection
• Wide input voltage: 8.4V028V
• Two output modes: 5V and 12V
• Working current up to 2A for stable performance
• Supports remote control channel to control BEC module on/off

Wiring & Voltage Selection

• 5V/12V mode switch (solder joint): when the solder joint is disconnected, output voltage is 5V (factory default); when the solder joint is connected, output voltage is 12V.
• Pad labels shown: OUT+, OUT-, 12V, RX, BAT, GND.
• Diagram notes positive/negative output, and shows example loads such as 5V/12V electrical appliances (e.g., COB light strips).

Specifications

Whats Included

• HGLRC 5-12V BEC 7 1
• Output cable 7 1
• Input cable 7 1

Applications

• Powering 5V or 12V accessories from 8.4V028V sources
• RC/FPV electronics and other projects requiring switchable 5V/12V regulated output

For installation and wiring support, contact support@rcdrone.top or visit https://rcdrone.top/.

Details

Switch between regulated 5V or 12V output and follow the included pad labels and wiring guide for clean accessory power.