• HGLRC M100 PRO GPS module top view with M100-PRO label and PPS/POWER indicators
  • HGLRC M100 PRO GPS board underside with 6-pin connector and SCL/SDA/RX/TX/5V/GND labels
  • Angled view of M100-PRO GPS module showing ceramic patch antenna and 6-pin plug connector
  • HGLRC M100 PRO GPS promo graphic showing module photo and headline text about signal and satellites
  • Specification list for M100 PRO GPS: B101 chip, 115200 baud, 10Hz output, 3.3–5.5V input
  • Package contents: M100-PRO GPS module, ribbon cable, mounting pad, and HGLRC sticker sheets
  • Size and weight diagram showing packaging dimensions and module size 21.2mm plus single weight 7.9g
  • Side angle of M100-PRO module showing raised antenna housing and PPS/POWER markings on board edge
1 8

HGLRC M100 PRO GPS Module w/ QMC5883L Compass, B101 10th Gen, 120CH, 10Hz, UBX, 3.3-5.5V

HGLRC M100 PRO GPS Module w/ QMC5883L Compass, B101 10th Gen, 120CH, 10Hz, UBX, 3.3-5.5V

HGLRC

$32.99 USD
$32.99 USD
Розпродаж Продано
Taxes included. Доставка розраховується під час оформлення замовлення.
Shipped from
  • PayPal
  • Visa
  • Mastercard
  • American Express
  • JCB
  • Discover
  • Diners Club
  • Google Pay
  • Apple Pay
Переглянути повну інформацію

Overview

The HGLRC M100 PRO is a compact GPS Module with a ceramic antenna, B101 (10th generation) chip, and QMC5883L compass for positioning and precise heading on fixed-wing and multi-rotor builds. It supports five-mode positioning with multi-constellation reception and a satellite search count of 50+.

Key Features

  • B101 (10th generation) chip
  • Satellite search number: 50+
  • Receiving channel expanded to 120ch
  • QMC5883L compass for more accurate pointing
  • Five-mode positioning; multi-constellation support (GPS + GLONASS + BDS + GALILEO + IRNSS)
  • Onboard indicator lights: POWER (power) and PPS (positioning)
  • Pin pads/connector signals: SCL, SDA, RX, TX, 5V, GND

Specifications

Model M100 PRO GPS
Chip B101 (10th generation chip)
Compass QMC5883L
Receiving channel 120
Baud rate 115200
Protocol UBX
Antenna Ceramic antenna
Output frequency 10Hz
Frequency bands GPS L1, GLONASS G1, BDS B1, GALILEO E1, QZSS L1, SBAS L1, IRNSS
Power input 3.3-5.5V
Weight 7.9g
Size 21.2 x 21.2 x 8.2mm
Acceleration 4G
Speed 500m/s
Operating temperature -40°C to +85°C
Storage temperature -40°C to +105°C

Indicator Lights

State PPS (blue light) Power (red light)
Normal start Normal bright Normal bright
Real position accuracy Flickering Normal bright

Wiring

  • UART: Connect GPS TX to flight controller RX, and GPS RX to flight controller TX.
  • Power: Connect 5V and GND.
  • Compass (I2C): Connect SCL and SDA.

What’s Included

  • HGLRC M100 PRO GPS x 1
  • Heat shrink tube (phi 18mm x 25mm) x 1
  • HGLRC sticker x 1
  • HGLRC manual x 1
  • SH1.0-6pin cable x 1

For installation questions and pre-sales support, contact support@rcdrone.top or visit https://rcdrone.top/.

Details

HGLRC M100 PRO GPS module hero graphic highlighting 10th‑gen B101 chip and 50+ satellite search

Compact GPS module designed for stronger reception and faster satellite search on fixed-wing and multi-rotor builds.

B101 10th‑generation GPS chip performance graphic with five‑mode positioning and 50+ satellites callout

The B101 (10th generation) chip supports five-mode positioning with multi-constellation reception for dependable locks.

Multi‑constellation positioning graphic and QMC5883L compass callout for precise heading on M100‑PRO module

A built-in QMC5883L compass helps deliver more accurate heading for navigation features.

M100‑PRO board showing POWER (red) and PPS (blue) onboard LED indicators plus series comparison table

Onboard POWER and PPS LEDs make it easy to confirm power and positioning status at a glance.

M100 PRO GPS specification sheet with module photos, indicator status table, and wiring diagram header

Specs, indicator meanings, and pin information are laid out for quick setup and troubleshooting.

Flight controller to M100‑PRO GPS wiring diagram plus package contents: module, stickers, heat shrink, 6‑pin cable

Includes an SH1.0 6-pin cable and accessories to simplify installation.

Related Collections