2× Ovonic 14.8V 6500mAh 120C 4S1P Hardcase LiPo Battery Pack, Deans T + TRA Adapter for 1/8 RC Cars

Overview

This set includes 2× Ovonic hardcase LiPo battery packs designed for high-current RC use, rated at 14.8V 6500mAh in a 4S1P configuration with a 120C continuous discharge rating. Each pack is fitted with a Deans T plug and includes a Deans T to TRA plug adapter for vehicles that use TRA-style connectors.

Note on promotional graphics: One product graphic contains the text “6000mAh / 3S1P / 11.1V”. The battery pack label and listed specifications for this item are 6500mAh / 4S1P / 14.8V.

Key Features

• Hardcase protection: Protective hardcase pack style.
• High discharge capability: 120C continuous discharge rate (240C burst listed).
• Connector flexibility: Deans T Plug with Deans T to TRA adapter included.
• Balance lead: JST-XHR-5P balance connector.
• Wiring callout: Solid copper wire (stated in product graphic).
• Manufacturer-stated performance callouts (from graphics): “The stacking process extends cycle life to 350+ times”, “High Energy Density: 128 Wh/L”, and “Micro Internal Resistance: < 5mΩ”.
• Manufacturer comparison graphic text (informational): “6500mAh Real Capacity” at “1.6A”, compared against “Fake capacity Battery 6275mAh” (tester display text also shows “Lipo-2S Charge Done”).

Specifications

What's Included

• 2 × Ovonic 14.8V 6500mAh 4S 120C Hardcase LiPo Batteries
• 2 × Deans T to TRA Plug Adapters
• 2 × Brand Stickers
• 1 × User Manual

Applications

• 1/8 scale RC cars, trucks, and buggies: 4S hardcase format for high-current setups.
• Vehicles using Deans T connectors: Direct connection via Deans T Plug.
• Vehicles using TRA-style connectors: Use the included Deans T to TRA adapter.

For fitment questions (battery tray size, connector type, or charger compatibility), contact [email protected] or visit https://rcdrone.top/.

Charging & Safety Warnings

• Voltage Limits: Always use a dedicated LiPo balance charger. Stop charging immediately when cell voltage reaches 4.2V, and never discharge below 3.2V per cell.
• Storage Guidelines: If leaving the batteries idle for more than 48 hours, store them at a proper storage charge of 3.8V–3.85V per cell in a LiPo safety bag.
• Pre-Run Inspection: Verify that your battery tray can accommodate a 50mm height profile. Always inspect the hardcase for any structural cracks or heavy wear before each use.

Video

Details

Hardcase 4S LiPo packs for 1/8 RC power setups, with Deans T main lead and JST‑XHR‑5P balance plug; some promo graphics may list different specs than the 6500mAh 14.8V pack label.

A 4S hardcase format designed to sit securely in many 1/8 scale battery trays for high-current RC cars and trucks.

Box includes two 14.8V 6500mAh hardcase packs plus Deans T to TRA adapters, stickers, and a user manual.