T-Motor VZ42x16.5 VTOL Propeller 42.2in Matte Carbon Fiber Composite, Flange Mount Ø12/Ø30

Overview

The T-Motor VZ42x16.5 is a VTOL propeller designed for VTOL fixed-wing UAVs in multicopter mode, focusing on high strength, high stiffness, and lightweight design for demanding VTOL operating conditions.

Key Features

• High strength: built to withstand centrifugal loads and maneuver-induced alternating loads at high RPM.
• High stiffness: supports blade-tip clearance in compact layouts, suppresses aeroelastic deformation, and helps prevent flutter.
• Lightweight design: reduced moment of inertia for rapid thrust response and higher flight control bandwidth.
• VTOL aerodynamic design: optimized for vertical takeoff/landing thrust and reduced drag during cruise (when the propeller is stopped).
• Composite manufacturing: prepreg compression molding (product porosity below 1%), plus a PMI foam core.
• Layup design: bending & torsion resistant layup design with optimized fiber orientation and ratio.
• Measured comparison data: 30% flexural strength and 20% torsional stiffness (from comparative testing vs. T-Motor G Series propellers).
• Blade root optimization: thickness optimized for structural redundancy and reduced load on connecting bolts.
• Custom VTOL propeller service: 10 to 100 inches, with pitch matching and motor matching support.

For compatibility checks and order support, contact support@rcdrone.top or visit https://rcdrone.top/.

Specifications

What’s Included

• CCW x 1
• CW x 1
• Propeller cover plate (Φ46 x 4.5 mm) x 2
• Socket head screws (M5 x 28 mm) x 8

Applications

• VTOL fixed-wing UAVs (multicopter mode)
• Heavy-lift VTOL propulsion setups requiring a 42.2-inch propeller

Notes

• Appearance diagrams and renderings are for reference only; the actual product prevails.
• Flexural strength and torsional stiffness improvement data are based on comparative testing between VZ Series and G Series propellers.
• Bolt shear load comparison data is sourced from simulation comparisons between installation bolts for VZ Series and V Series propellers.
• Test data was obtained under specific laboratory conditions; actual results may vary depending on environment, platform, software, and other factors.

Details

The T-Motor VZ42x16.5 VTOL propeller features a carbon-fiber look blade design for clean integration on VTOL builds.

The VZ42x16.5 VTOL prop features a centered hub with a 12 mm bore and multi-hole mounting pattern for secure installation.

The VZ42x16.5 VTOL propeller kit includes one CW and one CCW propeller, two Ø46×4.5 mm cover plates, and eight M5×28 mm socket head screws.