HGLRC Rekon Y6 5-Inch FPV Frame Kit 3K Carbon Fiber 5mm Arms

Overview

The HGLRC Rekon Y6 Frame is a 5-inch frame kit compatible with analog / O3 / O4 / Moonlight Kit VTX setups. The Y6 layout is designed to increase propeller area by 50% compared with a standard 5-inch quadcopter, helping support full-size action cameras while keeping the build compact. Propellers are positioned to stay out of the action camera view for cleaner footage.

Key Features

Compatible with analog version / O3 HD version / O4 HD version / Moonlight HD version
Y6 layout: 50% increase in propeller area vs. standard 5-inch quadcopter (for carrying a full-size action camera while maintaining a compact design)
Fixed power connector design to reduce instability caused by connector shake during flight
Reserved side antenna mount for flexible antenna positioning; supports dual-antenna receiver installation to help reduce signal dead zones
Unobstructed camera views: propellers designed to avoid the action camera’s field of view
Includes M100mini GPS holder (GPS not included)
USB parameter adjustment port hardware included (Type-C adapter / connectors / cable)

Specifications

Product name	Rekon
Model	Rekon Y6 frame kit
Material	3K carbon fiber
Type	5-inch frame
Wheelbase	200 mm front, 170 mm rear
Dimensions	240 mm x 210 mm
Top plate thickness	2 mm
Bottom plate thickness	2 mm
Middle plate thickness	2 mm
Front arm / rear arm thickness	5 mm
Motor mount a / motor mount b thickness	2 mm
Bottom plate support thickness	3 mm
Gap between upper and lower plates	25 mm
Flight control mounting hole	25.5 x 25.5 mm
Camera mount / supported camera	19 x 19 mm / 20 x 20 mm
Motor mounting hole	12 x 12 mm
Single frame weight	119 g
Total weight	279 g
Box size	235 mm x 55 mm x 173 mm

What’s Included

2 mm top plate x1
2 mm middle plate x1
2 mm bottom plate (base plate) x1
5 mm front arm x2
5 mm rear arm x1
2 mm motor fixing mount a x3
2 mm motor fixing mount b x3
3 mm bottom plate support x1
Bottom plate support protection pad x4
TPU black GoPro holder mount x1
TPU black GPS fixed seat / GPS fixing mount x1
TPU black XT60+ receiver fixing parts x1
TPU black simulated version hood x1
TPU black simulated image transmission single antenna mount x1
TPU black bottom receiver antenna fixing buckle x1
TPU black side receiver antenna fixing base / side receiver antenna fixing mount x1
TPU black O3 hood x1
TPU black O4 hood x1
TPU black HD image transmission dual antenna base / dual antenna seat x1
Rekon battery straps 20 x 250 mm x2
Battery anti-slip pad / battery anti-slip sticker x1
Network aluminum column M3 x 25 mm x4 (black reticulate pattern aluminum post)
Semi-circular head hexagon screw M2 x 4 mm x31
Semi-circular head hexagon screw M3 x 6 mm x4
Semi-circular head hexagon screw M2 x 7 mm x4
Semi-circular head hexagon screw M3 x 8 mm x3 (dispensing)
Semi-circular head hexagon screw M3 x 10 mm x4
Semi-circular head hexagon screw M3 x 14 mm x3
Semi-circular head hexagon screw M3 x 22 mm x3
Cup head hexagon screw M2 x 10 mm x5
Counter-sunk hexagon socket screw M2 x 10 mm x7
Round head hexagon screw M2 x 3 mm x5
Round head hexagon screw M2 x 5 mm x5
Flat round head hexagon screw M5 x 20 mm x1
Hexagon nut M2 x2
Anti-loosening self-locking nut M2 x5
Anti-loosening self-locking nut M5 x1 (red)
Type-C male adapter x1
Type-C female x1 (Y6 frame adjustment port Type-C female connector)
Connection line for parameter adjustment port x1
Dual-end SH1.0-4P, 11" 0.08" x1
Cable tie 2 x 120 mm x3
Wire tube x6
Universal QR code instruction card x1

Recommended Parts (Not Included)

Flight control: SPECTER F722 40A 4S-6S 6 in 1 AIO
Motor: 2004 1800 KV
Camera: 19 x 19 mm / 20 x 20 mm
Propeller: 5 inches
Battery: 18650 6S 1P 3000 mAh

Installation Notes

Carbon plate assembly uses: counter-sunk hexagon socket screw M2 x 10 mm; half round head hexagon socket screw glue M3 x 10 mm
Install dog seat / GPS holder / O3 head cover using network aluminum column M3 x 25 x 5 mm
Example fasteners shown during assembly: semi-round hexagon socket screw M3 x 6 mm, semi-round hexagon socket screw M3 x 22 mm, nut M2
XT60+ receiver holder uses network aluminum column M3 x 25 x 5 mm; carbon plate fixation example uses semi-round hexagon socket screw M3 x 14 mm
Motor installation examples: hexagon socket screw M2 x 4 mm; counter-sunk hexagon socket screw M2 x 10 mm

For pre-sales or build support, contact support@rcdrone.top or visit https://rcdrone.top/.

Details

HGLRC Rekon Y6 5-inch FPV frame kit overview, compatible with analog, O3, O4 and Moonlight HD setups

Built around a compact Y6 layout, Rekon Y6 supports multiple video systems—analog, DJI O3/O4, or Moonlight—using included TPU parts.

Rekon Y6 frame installation guide with multiple angles and step-by-step carbon plate assembly diagram

Assembly steps and hardware callouts help speed up the build and keep the stack and mounts aligned.

Close-up installation steps for XT60 receiver holder, antenna mount, USB parameter port, and anti-slip battery pad

Practical mounting points for power, antennas, and USB tuning keep wiring tidy and reduce movement during flight.

Motor base and arm mounting close-up, showing screw positions for securing a motor to the carbon fiber arm

HGLRC Rekon Y6 5-inch FPV frame specifications and size/weight chart with wheelbase, plate thickness, and weights

Key dimensions and weights are listed for quick planning around motors, stack size, and overall build weight.

商品已加入購物車

HGLRC Rekon Y6 5-Inch FPV Frame Kit 3K Carbon Fiber 5mm Arms, Compatible Analog/O3/O4/Moonlight