略過產品資訊
1 / 9

STARTRC 雲台保護罩 適用於 DJI Air 3S – 相機鏡頭保護蓋、防撞雲台護罩、PC材質,尺寸91.5×78.3×104.8mm,重量28g

STARTRC 雲台保護罩 適用於 DJI Air 3S – 相機鏡頭保護蓋、防撞雲台護罩、PC材質,尺寸91.5×78.3×104.8mm,重量28g

StartRC

定價 $9.39 USD
定價 $0.00 USD 售價 $9.39 USD
特價 售罄
已包含稅額。 結帳時計算運費
預設標題
查看完整資訊

概述

這款STARTRC雲台保護器專為DJI Air 3S設計。它作為相機鏡頭保護蓋和防撞雲台護罩,為雲台、相機和前方感應器在存儲和運輸過程中提供綜合保護。其卡扣設計精確貼合,有助於防止意外鬆動,並在不刮傷飛機的情況下保護組件。

主要特點

  • 精確適配DJI Air 3S雲台相機;穩定、堅固的模具,安全的卡扣安裝。
  • 高韌性的PC材料;耐用且耐磨。
  • 兩側和上方的矽膠墊在安裝或拆卸保護器時有助於保護無人機。
  • 綜合保護:防塵、抗刮擦和抗碰撞。
  • 設計不影響存儲;適合原裝包和大多數手提箱、防水箱和背包。
  • 一鍵安裝和拆卸;抬起即可釋放,鏡頭不會卡住。
  • 在存儲和運輸過程中保護雲台相機,以延長使用壽命。

規格

品牌 STARTRC
產品類型 雲台保護器
型號 dji air 3s 雲台保護器
兼容的無人機品牌 DJI
材料 PC
顏色 灰色
尺寸 91.5*78.3*104。8mm
淨重 28克
認證
產地 中國大陸
包裝

包含內容

  • 保護蓋 × 1

應用

  • 在儲存和運輸過程中保護 DJI Air 3S 的雲台、相機和傳感器。

詳細資訊

STARTRC Air 3S Gimbal Protector, Silicone pads protect drone during installation and removal of protector.STARTRC Air 3S Gimbal Protector, PC construction with high toughness and durability.STARTRC Air 3S Gimbal Protector, Device provides integrated protection against dust, scratches, and collisions.STARTRC Air 3S Gimbal Protector, One-step installation and removal of lenses, with lift-to-release mechanism to prevent sticking.STARTRC Air 3S Gimbal Protector, Integrated device features dustproof, scratch-resistant, and collision-resistant design for added protection.STARTRC Air 3S Gimbal Protector, DJI Air 3S Gimbal Protector by STARTRC protects DJI Air 3S gimbal, camera, and sensors during storage and transportation.STARTRC Air 3S Gimbal Protector, The protective cap guards the gimbal, camera, and front sensors from damage during storage and transport.STARTRC Air 3S Gimbal Protector, One-step install and removal with easy lifting mechanism prevents lens from getting stuck.STARTRC Air 3S Gimbal Protector, Silicone pads provide protection for drones during installation and removal of protectors.STARTRC Air 3S Gimbal Protector, Silicone pads on both sides and top prevent damage to drone during installation or removal of protector.STARTRC Air 3S Gimbal Protector, Attach part ① to drone, clip ② to bottom; remove by pulling lever ③. Install/remove only when powered off. Improper use voids warranty.

雲台保護器安裝:將部件 ① 附加到無人機上,然後將 ② 夾到底部。拆卸:拉動槓桿 ③,取出蓋子。僅在無人機關閉電源時安裝/拆卸。不當使用將免除責任。

STARTRC Air 3S Gimbal Protector, The snap-on design ensures precise fit, preventing accidental loosening and protecting the aircraft during assembly.STARTRC Air 3S Gimbal Protector, 80x82x96mm