Ovonic UAV 12000mAh 6S 22.2V 15C LiPo Battery AS150 Plug + JST-XH Balance for Agriculture Drone
Ovonic UAV 12000mAh 6S 22.2V 15C LiPo Battery AS150 Plug + JST-XH Balance for Agriculture Drone
Ovonic
تعذر تحميل توفر الالتقاط
Overview
The Ovonic UAV 12000mAh 22.2V 6S 15C LiPo battery with AS150 connector is designed for UAV agriculture drone power systems and other multi-rotor aircraft that require a 6S pack with an AS150 discharge plug.
The product description states the real maximum power capacity is up to 14000mAh, and the maximum charge/discharge rate is up to 25C.
Key Features
- Li-polymer (LiPo) battery for UAV use
- 6S pack (label shows 6S1P)
- AS150 discharge connector
- JST-XH balance connector (labeled “JST-XHR” in product artwork)
- Energy label: 266.4Wh
Specifications
| Brand | Ovonic |
| Chemistry | Li-polymer |
| Cell count | 6S |
| Cell configuration (label) | 6S1P |
| Nominal voltage | 22.2V |
| Capacity | 12000mAh |
| Discharge rate | 15C |
| Energy (label) | 266.4Wh |
| Balance/charge plug | JST-XH (labeled “JST-XHR” in artwork) |
| Discharge plug | AS150 connector |
| Dimensions (L x W x H) | 191mm x 76mm x 57mm |
| Net weight (provided, dev.20g) | 1785g |
| Weight (shown in artwork) | 1755g |
Compatible With
Freefly ALTA 6 & 8, XL Hexacopter, xFold SPY x12, Gryphon Dynamics OCTO OT-1200F, Gryphon Dynamics HEXA HX-900F (suggested to run 2 in parallel for 28000mAh of power), DIY drones, agriculture spraying drones, pesticide spraying drones, multi-rotors, and other airplanes.
Fitment depends on matching both voltage and connector type.
Usage & Safety Notes
- Use only when the voltage and plug type match the aircraft power system.
- Stop charging immediately when any cell reaches 4.2V (normal cell voltage is between 3.7V to 4.2V).
- Before use, check the battery surface condition and verify the voltage is normal.
- If a new battery does not hold a full charge or loses charge quickly, use a balance charger and cycle it several times.
For connector selection, compatibility questions, or after-sales support, contact [email protected] or visit https://rcdrone.top/.
Video
Details
Built for UAV power systems that use an AS150 discharge connector, with a separate JST-XH balance lead for safe charging.
A high-capacity 6S pack for multi-rotor and agriculture drone setups where 22.2V and AS150 fitment is required.
Connector and pack details are clearly labeled on the case, including 6S1P configuration and the AS150 discharge plug.
Check available space and payload limits before purchase: approx. 191×76×57mm, with weight listed at 1755g on the artwork.
A compact, upright form factor that fits many UAV battery trays while delivering 6S voltage for stable flight power.
