Ovonic 120C 1300mAh 4S 14.8V LiPo Battery Pack 2PCS with XT60 Plug for FPV Racing Drone
Ovonic 120C 1300mAh 4S 14.8V LiPo Battery Pack 2PCS with XT60 Plug for FPV Racing Drone
Ovonic
تعذر تحميل توفر الالتقاط
Overview
This 2-pack Ovonic 120C 1300mAh 4S LiPo battery pack (14.8V) is designed for FPV racing drone and 4S quad builds that use an XT60 power connector. It is labeled 19.24Wh per pack and uses a soft-case pack design.
Key Features
- High discharge rating: 120C (max burst discharge rate: 240C).
- 4S1P configuration, 14.8V nominal voltage, 1300mAh capacity.
- XT60 discharge plug; balance charge connector labeled JST-XHR-5P (also referenced as JST-XH).
- Soft case pack.
- Product performance callouts: +12% longer running time, -5% lighter weight, -4% lower resistance.
- Advantage callouts: long cycle life, faster charging time, higher discharge capacity, higher performance in power, high rate discharge current.
Specifications
| Brand | Ovonic |
| Chemistry | Li-Polymer (LiPo) |
| Configuration | 4S1P |
| Nominal Voltage | 14.8V |
| Capacity | 1300mAh |
| Energy (label) | 19.24Wh (per pack) |
| Discharge Rate | 120C |
| Max Burst Discharge Rate | 240C |
| Dimensions | 74 x 35 x 30mm (dev. 5mm / 2mm / 2mm); also shown as 73 x 35 x 29mm (2.9 x 1.3 x 1.1 inch) |
| Weight | Net weight (dev. 20g): 312g total (156g per pack); also shown as 155g / 0.34lb per pack |
| Discharge Connector | XT60 plug |
| Charge/Balancer Connector | JST-XH; also labeled JST-XHR-5P |
| Pack Type | Soft case |
What's Included
- 2 x Ovonic 120C 14.8V 1300mAh 4S LiPo Battery Pack (XT60)
- 1 x User manual
- Packaging box
- Brand stickers
Applications
- FPV racing drone and 4S quad builds requiring a 4S (14.8V) LiPo with XT60 connector
- Long range FPV setups using 4S power systems (as stated on the product material)
Charging & Use Notes
- Compatibility depends on matching both voltage and connector type.
- Stop charging immediately when any cell reaches 4.2V (normal cell voltage is between 3.7V to 4.2V).
- Inspect the battery surface and check that the voltage is normal before first use.
- If a new battery does not hold a full charge or loses charge quickly, use a balance charger and cycle it several times.
For product selection help or after-sales support, contact [email protected] or visit https://rcdrone.top/.
Video
Details
Two 4S 1300mAh packs are included for FPV drones that use an XT60 power connector.
Built for 4S quad and FPV racing builds where high discharge performance matters.
Key specs at a glance: 4S1P 14.8V, 1300mAh, 120C discharge, plus connector types and pack dimensions.
Performance callouts highlight longer running time, lighter weight, and lower internal resistance.
Packaging includes a user manual, packing box, and Ovonic brand stickers.
A practical match for long-range FPV and other 4S builds when voltage and connector type are compatible.
