Ovonic 120C 6S 1300mAh 22.2V LiPo Battery 4-Pack XT60 for 5–6 Inch FPV Racing Drones
Ovonic 120C 6S 1300mAh 22.2V LiPo Battery 4-Pack XT60 for 5–6 Inch FPV Racing Drones
Ovonic
تعذر تحميل توفر الالتقاط
Overview
The Ovonic 120C 6S 1300mAh 22.2V LiPo battery pack is designed for high-current FPV racing and freestyle drone power systems. With a 6S1P configuration and XT60 discharge plug, it is suited to 5-inch and 6-inch FPV builds that require fast throttle response and stable voltage under load.
Key Features
- High discharge rate: 120C continuous, 240C max burst (manufacturer rating).
- 6S FPV pack format: 6S1P, 22.2V, 1300mAh (28.86Wh printed on the pack label).
- Connector set: XT60 discharge plug; JST-XHR-7P balance/charge plug.
- Pack style: Soft case.
- Capacity target for 5-inch builds: 1300mAh is commonly used on 5-inch racing drones; provided flight time guidance is about 4–6 minutes depending on setup and flying style.
- Manufacturer-stated performance notes: “+12% Longer Running Time”, “-5% Lighter Weight”, “-4% Lower Resistance”, “Safer”, and “ISO International Quality Certification”.
Specifications
| Brand | Ovonic |
| Chemistry | Li-Polymer (LiPo) |
| Configuration | 6S1P |
| Nominal voltage | 22.2V |
| Capacity | 1300mAh |
| Energy (printed on label) | 28.86Wh |
| Discharge rate | 120C |
| Max burst discharge rate | 240C |
| Dimensions | 74 x 43 x 35mm (also shown as 74*35*43mm); 2.6 x 1.6 x 1.3 inch (also shown as 2.6*1.3*1.6inch) |
| Net weight | 220g (0.44lb) per pack |
| Discharge plug | XT60 |
| Charge/balance plug | JST-XHR-7P (also listed as JST-XH-7P) |
| Pack type | Soft case |
Compatibility
- Suitable for FPV racing/freestyle drones using a 6S power setup with an XT60 battery lead.
- Manufacturer compatibility statement: “Perfect Fit for 5inch 6inch fpv drone racing, like as nazgul XL5, SL5, DC5 fpv racing freestyle drone, ect.”
- Examples mentioned: BetaFPV, EMAX Hawk, iFlight Nazgul, TBS Oblivion, Lumenier QAV-R 2, Holybro Kopis 2, Diatone GT R349.
- Fitment note: the battery will fit when both voltage and plug match the model’s requirements.
What's Included
- 4 x Ovonic 120C 6S 1300mAh 22.2V LiPo battery pack with XT60 plug
- 2 x brand stickers
- 1 x user manual
- Packing box
For pre-sales compatibility questions or after-sales support, contact https://rcdrone.top/ or email [email protected].
Charging & Safety Notes
- Stop charging immediately when any cell reaches 4.2V (normal cell voltage is 3.7V–4.2V).
- Before use, check that the battery surface is in good condition and that the voltage is normal.
- If a new battery will not hold a full charge or loses charge quickly, use a balance charger and cycle it several times.
Reviews
Details
Built for high-current FPV setups, the 6S 1300mAh pack is labeled 120C and uses an XT60 discharge lead.
Compact 74×43×35mm sizing and a 220g listed weight make it a practical 6S option for many 5-inch builds.
An XT60-equipped 6S pack format fits many 5-inch and 6-inch FPV racing and freestyle frames that run 6S power.
In the box: battery packs, brand stickers, a user manual, and the packing box for storage and transport.
The soft-case pack comes pre-wired with an XT60 discharge connector plus a JST-XHR-7P balance lead for charging.
