
Overview
CODDAR 1800mAh 110C LiPo batteries provide rechargeable power for FPV drones and compatible RC aircraft. Choose 2S, 3S, 4S, 5S or 6S to match your power system. Each configuration includes an XT60 power connector and a separate JST-XH balance lead.
Features
- Standard lithium-polymer cells rated at 3.7 V nominal and 4.2 V fully charged per cell.
- 1800mAh capacity and a 110C discharge rating across all five cell configurations.
- A shrink-wrapped series-cell pack with attached power and balance leads for aircraft power and compatible balance charging.
- Five cell counts provide nominal pack voltages from 7.4 V to 22.2 V. Select the voltage supported by your aircraft electronics.
Specifications
| Brand | CODDAR |
|---|---|
| Battery chemistry | Standard lithium polymer (LiPo) |
| Capacity | 1800mAh |
| Discharge rating | 110C |
| Charge rate | 1C–5C, equivalent to 1.8–9 A |
| Power connector | XT60 |
| Nominal cell voltage | 3.7 V |
| Full-charge cell voltage | 4.2 V in LiPo charging mode |
| Storage cell voltage | Approximately 3.85 V |
Configuration comparison
| Specification | 2S | 3S | 4S | 5S | 6S |
|---|---|---|---|---|---|
| Model | CD2S1800110 | CD3S1800110 | CD4S1800110 | CD5S1800110 | CD6S1800110 |
| Cell configuration | 2S1P | 3S1P | 4S1P | 5S1P | 6S1P |
| Nominal voltage | 7.4 V | 11.1 V | 14.8 V | 18.5 V | 22.2 V |
| Full-charge pack voltage | 8.4 V | 12.6 V | 16.8 V | 21.0 V | 25.2 V |
| Approximate net weight | 101 g | 147 g | 191 g | 231 g | 275 g |
| Body size (L × W × H) | 73 × 34 × 21 mm | 77 × 34 × 30 mm | Confirmation required | 78 × 34 × 48 mm | 79 × 34 × 57 mm |
| Balance connector | JST-XH 3-pin | JST-XH 4-pin | JST-XH 5-pin | JST-XH 6-pin | JST-XH 7-pin |
Confirm the current 4S pack dimensions before ordering for a constrained battery bay. Allow additional space around every pack for its power and balance leads.
Charging and use
Check the aircraft connector and cell-count rating before connection. Select LiPo mode and the correct cell count on a compatible balance charger, with a maximum of 4.2 V per cell. Set a charge current within the supported 1C–5C range and the charger rating. Store at approximately 3.85 V per cell and avoid prolonged storage fully charged. Plan to land at about 3.6 V per cell and avoid fully exhausting the pack, which can cause over-discharge damage and prevent recharging.
To identify the nominal cell voltage, divide the nominal pack voltage by its cell count. For example, 22.2 V ÷ 6 = 3.7 V per cell. Standard LiPo packs use 3.7 V nominal cells, while LiHV packs use 3.8 V nominal cells. This 1800mAh series uses standard LiPo charging settings.
What's Included
One CODDAR 1800mAh 110C LiPo battery in the selected cell configuration, fitted with an XT60 power lead and JST-XH balance lead.
Applications
For FPV drones, RC helicopters, fixed-wing aircraft and other RC models with a compatible voltage rating, XT60 connector and battery compartment. Check the selected pack's net weight and available installation space before use.
FAQ
Which cell configuration should I choose?
Match the 2S, 3S, 4S, 5S or 6S configuration to your aircraft's supported voltage. Then check weight, connector and battery-bay clearance. Confirm the current 4S dimensions for fit-critical installations.
Which charging mode should I use?
Use standard LiPo mode with the correct cell count and a maximum of 4.2 V per cell. The 1800mAh capacity gives a 1C charge current of 1.8 A.
What voltage should I use for storage?
Store at approximately 3.85 V per cell. During flight, plan to land at about 3.6 V per cell and avoid fully exhausting the battery.
Visual Details























