পণ্য তথ্য এড়িয়ে যান
1 এর 6

CODDAR 350mAh 90C LiHV Battery – 2S 3S 4S 6S, XT30 or JST

CODDAR 350mAh 90C LiHV Battery – 2S 3S 4S 6S, XT30 or JST

CODDAR

নিয়মিত দাম $20.10 USD
নিয়মিত দাম বিক্রয় মূল্য $20.10 USD
বিক্রয় বিক্রি হয়ে গেছে
ট্যাক্স অন্তর্ভুক্ত. শিপিং চেকআউটের সময় গণনা করা হবে।
Connector
Battery
সম্পূর্ণ বিবরণ দেখুন

Overview

The CODDAR 350mAh 90C LiHV battery supplies high-voltage lithium-polymer power for compatible compact FPV and RC aircraft. Choose a 2S, 3S, 4S or 6S pack and an XT30 or JST discharge connector to match your power system. Each battery includes a separate JST-XH balance lead.

Features

  • 350mAh capacity and a 90C discharge rating across all four cell counts.
  • High-voltage LiPo chemistry with a full-charge limit of 4.35V per cell.
  • Low-resistance design and matched cells in a compact rectangular cell stack in 2S1P, 3S1P, 4S1P or 6S1P configurations.
  • Selectable XT30 or JST discharge connector, with a dedicated balance lead for balance charging and cell monitoring.
  • Four pack sizes allow selection by supported voltage, mounting clearance and aircraft weight.

Specifications

Parameter 2S 3S 4S 6S
Model CD2S35090HV CD3S35090HV CD4S35090HV CD6S35090HV
Battery chemistry LiHV (high-voltage LiPo) LiHV (high-voltage LiPo) LiHV (high-voltage LiPo) LiHV (high-voltage LiPo)
Capacity 350mAh 350mAh 350mAh 350mAh
Cell arrangement 2S1P 3S1P 4S1P 6S1P
Nominal voltage 7.6V 11.4V 15.2V 22.8V
Full-charge pack voltage 8.7V 13.05V 17.4V 26.1V
Nominal energy 2.66Wh 3.99Wh 5.32Wh 7.98Wh
Discharge rating 90C 90C 90C 90C
Charge rate 1C–5C 1C–5C 1C–5C 1C–5C
Charge current at 350mAh 0.35–1.75A 0.35–1.75A 0.35–1.75A 0.35–1.75A
Approximate net weight, XT30 reference 21g 29g 38g 57g
Body dimensions, L × W × H 52 × 17 × 13 mm 55 × 17 × 19 mm 55 × 17 × 26 mm 56 × 17 × 38 mm
Balance connector JST-XH 3-pin JST-XH 4-pin JST-XH 5-pin JST-XH 7-pin
Discharge connector XT30 or JST, as selected XT30 or JST, as selected XT30 or JST, as selected XT30 or JST, as selected

Charging and storage

Use a balance charger with LiHV mode set to the selected cell count. The full-charge limit is 4.35V per cell. Use 3.85V per cell for storage. Set the flight controller battery warning for the selected multi-cell pack and land before over-discharge. The 3.5V landing recommendation applies to 1S batteries only. These packs are 2S to 6S. Avoid complete discharge, which can damage the pack and prevent subsequent charging.

Connector and aircraft selection

Photos and illustrated specifications show the XT30 configuration. The supplied discharge connector follows your XT30 or JST selection. Listed net weights refer to the illustrated XT30 packs. Connector choice can change the final weight. Check voltage support, connector, polarity, weight and battery-bay clearance before choosing a pack.

What's Included

One CODDAR 350mAh 90C LiHV battery in the selected cell count and discharge-connector configuration, fitted with discharge and balance leads.

Applications

For compatible compact FPV drones, RC helicopters and fixed-wing models. Compatibility depends on the aircraft's supported cell count, connector and available battery space.

FAQ

Which charger mode does this battery require?
Use LiHV balance-charge mode with the correct cell count and a maximum of 4.35V per cell. Full pack voltage is 8.7V for 2S, 13.05V for 3S, 17.4V for 4S and 26.1V for 6S.

Will the battery have XT30 or JST?
The supplied connector follows the option you select. The photos show the XT30 version for each cell count.

Do all versions use the same balance plug?
The JST-XH balance connector has 3 pins for 2S, 4 pins for 3S, 5 pins for 4S and 7 pins for 6S. Use the matching charger balance port.

How do I select the correct cell count?
Choose the cell count supported by the motor and electronics, then check pack dimensions and weight against your frame and mounting arrangement.

Visual Details

CODDAR 350mAh 3s specifications
The CD3S35090HV pack provides 11.4V nominal voltage and approximately 29g net weight for the illustrated XT30 configuration. Its separate JST-XH balance connector has 4 pins.
CODDAR 350mAh 3s dimensions
The 3S battery body measures 55 × 17 × 19 mm. Allow additional clearance for the discharge lead and the balance lead.
CODDAR 350mAh 3s applications
Use the 11.4V 3S version with FPV aircraft, RC helicopters or fixed-wing models designed for this cell count, connector and battery size.
CODDAR 350mAh 3s front and back
The front and back views preserve the 3S pack profile and lead routing. Keep the discharge and balance leads clear of the mounting strap and moving parts.
CODDAR 350mAh 4s specifications
The CD4S35090HV pack provides 15.2V nominal voltage and approximately 38g net weight for the illustrated XT30 configuration. Its separate JST-XH balance connector has 5 pins.
CODDAR 350mAh 4s dimensions
The 4S battery body measures 55 × 17 × 26 mm. Allow additional clearance for the discharge lead and the balance lead.
CODDAR 350mAh 4s applications
Use the 15.2V 4S version with FPV aircraft, RC helicopters or fixed-wing models designed for this cell count, connector and battery size.
CODDAR 350mAh 4s front and back
The front and back views preserve the 4S pack profile and lead routing. Keep the discharge and balance leads clear of the mounting strap and moving parts.
CODDAR 350mAh 6s specifications
The CD6S35090HV pack provides 22.8V nominal voltage and approximately 57g net weight for the illustrated XT30 configuration. Its separate JST-XH balance connector has 7 pins.
CODDAR 350mAh 6s dimensions
The 6S battery body measures 56 × 17 × 38 mm. Allow additional clearance for the discharge lead and the balance lead.
CODDAR 350mAh 6s applications
Use the 22.8V 6S version with FPV aircraft, RC helicopters or fixed-wing models designed for this cell count, connector and battery size.
CODDAR 350mAh 6s front and back
The front and back views preserve the 6S pack profile and lead routing. Keep the discharge and balance leads clear of the mounting strap and moving parts.