DSpower DS-S007/DS-S007M PWM Servo Motor, Plastic or Metal Gear, for Robotics and RC Models

DSpower

$35.00 USD

বিক্রয় বিক্রি শেষ

Taxes included. শিপিং চেকআউটের সময় গণনা করা হয়।

Version DS-S007 DS-S007M

পরিমাণ

সম্পূর্ণ বিবরণ দেখুন

Overview

DSpower DS-S007 and DS-S007M are PWM core-motor servo options for robotic and RC motion-control projects. Both operate from 4.8–6.0 V DC and use ABS cases, while DS-S007 has plastic gears and DS-S007M has metal gears. Select DS-S007 for its 90° ±10° operating travel or DS-S007M for 180° ±2° travel, a 25T output horn, and a 360° mechanical limit.

Features

Shared by both versions: ABS case, PWM communication interface, and core motor.
DS-S007 uses a plastic gear set; DS-S007M uses a metal gear set.
DS-S007M is described as providing quick, accurate response, high efficiency, low noise, and low power consumption.
The DS-S007M metal gear train is described as withstanding higher loads and extending service life.

Specifications

Parameter	DS-S007	DS-S007M
Operating voltage	4.8–6 V DC	4.8–6.0 V DC
Static current	≤20 mA	—
Stall current	≤950 mA at 4.8 V; ≤1.2 A at 6.0 V	≤1500 mA at 4.8 V; ≤1800 mA at 6.0 V
Max torque	≥3 kgf·cm at 4.8 V; ≥4 kgf·cm at 6.0 V	≥3.80 kgf·cm at 4.8 V; ≥4.20 kgf·cm at 6.0 V
Rotating direction	CCW (1000–2000 μs)	—
No-load speed	≤0.12 sec/60° at 4.8 V; ≤0.1 sec/60° at 6.0 V	≤0.10 sec/60° at 4.8 V; ≤0.12 sec/60° at 6.0 V
Pulse width range	500–2500 μs	—
Operating travel angle	90° ±10° (1000–2000 μs)	180° ±2° (500–2000 μs)
Return angle deviation	≤1°	—
Case material	ABS	ABS
Communication interface	PWM	PWM
Wire length	200 ±10 mm	—
Motor type	Core motor	Core motor
Gear set material	Plastic gear	Metal gear
Consumption current (no-load)	—	≤200 mA at 4.8 V; ≤210 mA at 6.0 V
Remote control angle	—	90° ±2°
Dead band width	—	≤5 μs
Mechanical limit angle	—	360°
Horn type	—	25T / Φ5.9 mm
Weight	—	20.7 g
Dimensions	—	29.6 × 13.2 × 40 mm

Applications

DS-S007M is presented for UAV camera mechanisms, remote-control cars, and walking robots. The servo range is also listed for humanoid robots, robotic arms, exoskeletons, quadruped robots, AGV vehicles, and ARU robots. The PWM interface and selectable travel-angle options support motion-control selection for these projects.

What's Included

For DS-S007M, the mounting hardware pack is presented with white servo control horns in round, four-arm, single-arm, and double-arm styles; two black rubber mounting grommets; two brass eyelets; mounting screws; and a smaller screw.