GEPRC Cinebot35 O4 Pro Ducted FPV Quadcopter with DJI O4 Air Unit Pro
GEPRC Cinebot35 O4 Pro Ducted FPV Quadcopter with DJI O4 Air Unit Pro
GEPRC
পিকআপের উপলভ্যতা লোড করা যায়নি
Overview
The GEPRC Cinebot35 O4 Pro is a ducted FPV quadcopter built around the DJI O4 Air Unit Pro video system. Its GEP-CT35 frame combines a protective electronics bay, a front canopy for the O4 Air Unit Pro, and a six-point suspended camera module designed to isolate vibration. The power system comprises a TAKER H743 flight controller, H60 Mini 32-bit 60A ESC, SPEEDX2 2105.5 2450KV motors, and HQProp D-T90MM tri-blade propellers.
A dedicated action camera mount is included, with two mounting configurations. The integrated function board provides anti-spark protection, buzzer, LED BEC, and a USB tuning port.
Key Features
- DJI O4 Air Unit Pro VTX, camera, and antenna
- Six-point floating, vibration-damping camera module
- TAKER H743 flight controller and H60 Mini 32-bit 60A ESC
- SPEEDX2 2105.5 2450KV motors with HQProp D-T90MM tri-blade propellers
- Protective frame structure with enclosed propeller ducts and high-coverage electronics bay
- Dedicated function board with anti-spark protection, buzzer, LED BEC, and USB tuning port
- Dedicated action camera mount with two mounting configurations
Specifications
| Model | Cinebot35 O4 Pro Version |
| Frame | GEP-CT35 |
| Wheelbase | 167 mm |
| Main plate thickness | 3.5 mm |
| Bottom plate thickness | 1.5 mm |
| Flight controller | TAKER H743 |
| MCU | STM32H743 |
| Gyro | ICM42688-P (SPI) |
| FC firmware | GEPRC_TAKER_H743MINI |
| Flash memory | 16 MB |
| ESC | H60 Mini 32-bit 60A |
| Motors | SPEEDX2 2105.5 2450KV |
| Propellers | HQProp D-T90MM tri-blade |
| Battery connector | XT60 |
| Video system | DJI O4 Air Unit Pro |
| Receiver options | PNP with O4 Pro built-in receiver or ELRS 2.4G |
| Weight | 388 g +/- 5 g (ELRS 2.4G version) |
| GPS | GEP-M10Q |
| Recommended battery | 6S 1300mAh to 6S 1550mAh |
| Flight time | 10-11 minutes in slow cruising flight |
Flight time varies with battery selection, payload, flight conditions, and flying style. For product assistance, configuration support, or spare parts, contact rcdrone.top.
What's Included
- 1 x Cinebot35 Quadcopter
- 4 x HQProp D-T90MM propeller pairs
- 1 x 15 x 150 mm battery strap
- 1 x L-shaped 1.5 mm hex wrench
- 1 x anti-slip battery pad
- 1 x binding plug
- 4 x rear landing pads
- 2 x front bottom landing pads
- 1 x front top cover
- 2 x O4 antenna mounts
- 2 x acrylic plates
- 3 x damping balls
- 1 x spare screw kit, including 2 rivet nuts; 4 x M2 x 4 button-head hex screws; 3 x M2 x 10 button-head hex screws; 4 x M2 x 7 button-head hex screws; 3 x M2 x 6 button-head hex screws; and 2 x M2 x 10 socket-head screws
Selected versions also include 1 x receiver connector cable for O4 PNP.
Videos
Details
The Cinebot35 O4 Pro combines a compact ducted layout with a front-mounted DJI O4 Air Unit Pro camera system.
A dedicated action-camera mount, floating camera module, flight stack, and integrated function board support a clean cinematic build.
Six independent damping points isolate the camera module from frame vibration to help reduce jello in recorded footage.
The TAKER H743 flight controller pairs with the H60 Mini 32-bit 60A ESC for the quadcopter’s core control and power system.
Clearly arranged solder pads and labeled motor connections make the flight-controller layout easier to work with during installation.
The protective frame combines enclosed propeller ducts with a high-coverage electronics bay around onboard components.
An integrated function board brings anti-spark protection, a buzzer, LED BEC, and a USB tuning port into one assembly.
A COB LED strip can be switched on for light-painting and other visual effects.
Two factory-tuned PID profiles provide selectable settings for cinematic shooting and freestyle flying.
Available configurations are identified in the version-options graphic; choose the listed variant that matches the required video setup.
The Cinebot35 O4 Pro pairs a 157 mm ducted frame with the DJI O4 Air Unit Pro and recommends a 6S 1050 mAh battery.
The Cinebot35 O4 Pro combines a compact ducted frame with a front-mounted camera and top-mounted antenna for FPV flight.
The Cinebot35 O4 Pro uses a compact ducted four-prop layout with a forward camera mount and protected propellers.
The ducted four-motor layout surrounds the propellers with protective guards, while the frame provides a front camera mount and accessible underside hardware.
The Cinebot35 O4 Pro package layout includes the ducted quadcopter, spare propellers, landing gear parts, mounting hardware, and battery straps.
The included accessory set provides battery straps, hex wrenches, a screwdriver, mounting hardware, connection cables, and spare screws for setup and maintenance.
The included hardware set contains M2 button, socket and washer head screws, M1.6 Phillips screws, and two brass nuts for assembly and maintenance.
The GEPRC Cinebot35 O4 Pro combines a compact ducted frame, four protected propellers, and a forward-mounted DJI O4 Air Unit Pro camera setup.
The Cinebot35 O4 Pro combines a four-duct propeller layout with a forward-mounted DJI O4 Air Unit Pro camera system.
The GEPRC Cinebot35 O4 Pro uses a four-duct frame to protect the propellers while keeping the FPV quadcopter layout compact.
The GEPRC Cinebot35 O4 Pro combines a compact ducted frame with a front-mounted DJI O4 Air Unit Pro camera and antenna.
The Cinebot35 O4 Pro uses a four-duct frame with protected propellers and a top-mounted FPV camera assembly.
The ducted four-prop layout, front camera mount, and dual rear antennas support a compact FPV setup.
The Cinebot35 O4 Pro combines a compact orange canopy, four ducted propeller guards, a front camera, and dual antennas.
The GEPRC Cinebot35 O4 Pro combines four ducted propeller guards with a front-mounted camera and top antenna for compact FPV flying.
Black-framed camera lens filters provide multiple tint levels for DJI O4 Air Unit Pro camera setups.
The Cinebot35 O4 Pro combines a protective ducted frame with a forward-mounted DJI O4 camera and dual antennas.
The Cinebot35 O4 Pro combines full propeller ducts, a front-mounted camera, and dual antennas in a compact FPV quadcopter layout.
The Cinebot35 O4 Pro uses a four-duct propeller layout with a front-mounted camera and top battery mounting platform.