Saltar a información del producto
1 de 6

CODDAR 850mAh 70C LiHV Battery – 2S, 3S, 4S, 6S with XT30

CODDAR 850mAh 70C LiHV Battery – 2S, 3S, 4S, 6S with XT30

CODDAR

Precio habitual $26.40 USD
Precio habitual Precio de venta $26.40 USD
Venta Agotado
Impuestos incluidos. Envío Calculado al finalizar la compra.
Connector
Battery
Ver todos los detalles

Overview

CODDAR 850mAh 70C LiHV batteries provide compact power for compatible FPV micro drones and RC aircraft. Choose 2S, 3S, 4S or 6S to match the aircraft's supported cell count and voltage. Each standard pack has an XT30 discharge connector and a separate JST-XH balance lead.

Features

  • 850mAh high-voltage lithium-polymer construction with a 70C discharge rating.
  • Series-connected cells provide 7.6 V, 11.4 V, 15.2 V or 22.8 V nominal pack voltage, depending on the selected configuration.
  • An XT30 lead supplies power to the aircraft, while the separate balance lead provides access to the individual cells during balance charging.
  • The narrow 18 mm body width suits compact installations. Pack height and weight increase with cell count.

Specifications

Specification Value
Brand CODDAR
Battery chemistry LiHV high-voltage lithium polymer
Capacity 850mAh
Discharge rating 70C
Charge rate 1C–5C, equivalent to 0.85–4.25 A for 850mAh
Charging mode and endpoint LiHV balance charge, 4.35 V per cell
Storage voltage 3.85 V per cell
Recommended landing voltage 3.6 V per cell
Discharge connector XT30

Configuration comparison

Specification 2S 3S 4S 6S
Model CD2S85070HV CD3S85070HV CD4S85070HV CD6S85070HV
Cell arrangement 2S1P 3S1P 4S1P 6S1P
Nominal voltage 7.6 V 11.4 V 15.2 V 22.8 V
Fully charged pack voltage 8.70 V 13.05 V 17.40 V 26.10 V
Body dimensions (L × W × H) 69 × 18 × 15 mm 70 × 18 × 22.5 mm 71 × 18 × 30 mm 72 × 18 × 45 mm
Approximate net weight 36 g 53 g 70 g 104 g
JST-XH balance connector 3-pin 4-pin 5-pin 7-pin

Charging and use

Check that the XT30 connector, cell count, fully charged voltage and pack dimensions match the aircraft before installation. Use LiHV balance-charging mode with the correct cell count and a 4.35 V per-cell endpoint. Store at 3.85 V per cell when the battery is not in use. Plan to land at about 3.6 V per cell and avoid fully draining the pack, as over-discharge can prevent further use or charging.

What's Included

  • 1 × CODDAR 850mAh 70C LiHV battery in the selected cell-count configuration, with attached XT30 and JST-XH leads.

Applications

For compatible FPV micro drones, toothpick-style quadcopters and RC aircraft using an 850mAh LiHV pack. Select the battery by the aircraft's electrical requirements and available mounting space.

FAQ

Does 4.35 V refer to the whole battery?
It is the fully charged voltage per cell. The full-pack values are 8.70 V for 2S, 13.05 V for 3S, 17.40 V for 4S and 26.10 V for 6S.

Which connector is supplied?
Each standard configuration has an XT30 power connector. The separate JST-XH balance connector has 3, 4, 5 or 7 pins for 2S, 3S, 4S or 6S respectively.

Can I swap a 2S pack for a higher-cell-count version?
Select the cell count supported by the aircraft's electronics. The voltage, height and weight vary across these four configurations, so check all three before choosing a pack.

Visual Details

2S specifications
The 2S1P configuration has a nominal voltage of 7.6 V and an approximate net weight of 36 g. Use the 3-pin JST-XH balance connection with a charger configured for 2S LiHV.
2S dimensions
Allow for the 69 × 18 × 15 mm battery body plus the leads and connectors when checking installation space. This view identifies the XT30 power connection.
2S front and back
The 2S pack uses a 3-pin balance plug. Both sides of the casing are shown to help identify the pack and lead arrangement.
3S specifications
The 3S1P configuration has a nominal voltage of 11.4 V and an approximate net weight of 53 g. Use the 4-pin JST-XH balance connection with a charger configured for 3S LiHV.
3S dimensions
Allow for the 70 × 18 × 22.5 mm battery body plus the leads and connectors when checking installation space. This view identifies the XT30 power connection.
3S front and back
The 3S pack uses a 4-pin balance plug. Both sides of the casing are shown to help identify the pack and lead arrangement.
4S front and back
The 4S pack has a five-pin balance connector and an XT30 discharge lead. The front and rear views show the same single battery.
4S specifications
The 4S1P configuration has a nominal voltage of 15.2 V and an approximate net weight of 70 g. Use the 5-pin JST-XH balance connection with a charger configured for 4S LiHV.
4S dimensions
Allow for the 71 × 18 × 30 mm battery body plus the leads and connectors when checking installation space. This view identifies the XT30 power connection.
6S specifications
The 6S1P configuration has a nominal voltage of 22.8 V and an approximate net weight of 104 g. Use the 7-pin JST-XH balance connection with a charger configured for 6S LiHV.
6S dimensions
Allow for the 72 × 18 × 45 mm battery body plus the leads and connectors when checking installation space. This view identifies the XT30 power connection.
6S front and back
The 6S pack uses a 7-pin balance plug. Both sides of the casing are shown to help identify the pack and lead arrangement.