4x Ovonic FPV 6S 1000mAh 100C 22.2V LiPo Battery Pack with XT60 + JST-XHR-7P for FPV Drones

Overview

The Ovonic 6S LiPo battery pack set includes 4 packs rated at 22.2V, 1000mAh, 100C with an XT60 discharge plug for FPV freestyle and FPV racing drones. Each pack uses a 6S1P Li-polymer configuration and includes a JST-XHR-7P balance/charge connector.

Key Features

• 4-pack set of Ovonic FPV LiPo batteries for multi-pack flying sessions
• High discharge rating: 100C (manufacturer lists max burst discharge rate: 200C)
• XT60 discharge connector and JST-XHR-7P balance connector
• Soft case (shown on product detail artwork)
• Product artwork notes “Universal Compatibility” and mentions fit for FPV and “TAYCAN DUCT 3 INCH CINEWHOOP, etc.” (confirm voltage and connector match before use)

Specifications

What's Included

• 4 x Ovonic 6S LiPo Battery Pack 1000mAh 100C 22.2V with XT60 plug
• 1 x User manual

For product support or order assistance, contact [email protected] or visit https://rcdrone.top/.

Usage & Charging Notes

• For an RC battery to fit, both the voltage and plug type must match the drone/power system.
• Stop charging immediately if any cell reaches 4.2V (normal cell voltage range is 3.7V to 4.2V).
• Before first use, check the battery surface condition and verify the voltage is normal.
• If a new battery will not hold a full charge or loses charge quickly, use a balance charger and cycle several times.

Video

Details