Ovonic CR 4S 6500mAh 50C 14.8V Hardcase LiPo Battery Pack Deans Plug for 1/8 RC Cars

Overview

The OVONIC CR 4S LiPo battery pack (6500mAh, 14.8V) is a hardcase battery with a Deans (T) discharge plug designed for 1/8 scale RC cars, including RC buggies and RC truggies. It combines high capacity with a 50C discharge rating for demanding RC driving such as racing, bashing, and off-road use.

Key Features

• 6500mAh capacity: Supports longer runtime per charge for 1/8 scale RC vehicles.
• 50C discharge rate: Rated for high current output; theoretical continuous current up to 325A (50C × 6.5Ah).
• Hardcase protection: Better physical protection than soft packs for RC car use.
• Connector set for RC cars: Deans (T) discharge plug plus JST-XHR-5P balance/charge plug.
• 4S1P configuration: 14.8V nominal for platforms that require a 4S LiPo battery pack.

Specifications

What's Included

• 1 x Ovonic 4S1P 14.8V 6500mAh 50C hardcase LiPo battery pack with Deans plug
• 1 x User manual

For product selection help (voltage, connector, fitment), contact support at https://rcdrone.top/ or [email protected].

Applications

• 1/8 scale RC cars requiring a 4S LiPo battery pack
• 1/8 RC buggies
• 1/8 RC truggies
• 1/8 RC monster trucks (when a 4S pack and Deans/T connector are required)

Safety & Charging Notes

1. Fitment depends on matching voltage and plug type.
2. Stop charging if any cell reaches 4.2V; normal cell voltage is 3.7V to 4.2V.
3. Before use, check the battery condition and confirm voltage is normal.
4. If a new battery does not hold a full charge or loses charge quickly, use a balance charger and cycle it several times.

Details

Built for 1/8 RC cars, this 4S hardcase pack combines a 6500mAh capacity with a 50C discharge rate for strong punch and longer runs.

Deans (T) discharge plug and JST-XHR-5P balance connector make it easy to match common RC car ESCs and balance chargers.