Overzicht
Beitian BE-508i is een GNSS-ontvanger module met een geïntegreerde antenne, ontworpen voor GNSS-positionering en timing in UAV-vluchtbesturing, industriële pc's, robotica, surveying en timingtoepassingen. Het ondersteunt meerdere GNSS-constellaties en geeft standaard NMEA/UBX-gegevens uit via TTL UART, met een onboard elektronische kompas (IST8310) beschikbaar via I2C.
Belangrijkste Kenmerken
- Multi-constellatie GNSS-ondersteuning: GPS/QZSS/BDS/Galileo en SBAS
- TTL-niveau UART met NMEA en UBX protocollen
- Configureerbare updatefrequentie tot 18 Hz (standaard 1 Hz)
- Configureerbare tijdspulsuitgang tot 10 MHz
- Ingebouwde elektronische kompas: IST8310 (I2C)
- Hechting aan de onderkant (3M-hechting)
Specificaties
| Model | BE-508i |
| Chip | M10050 |
| Ontvanger type | GPS L1 C/A, QZSS L1 C/A, BDS B1I/B1C, Galileo E1b/c, SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN |
| Standaard positie systeem | GPS, BDS, GALILEO |
| Versterkingssysteem | SBAS, QZSS |
| Kanaal | N/B |
| Gevoeligheid (Tracking & Navigatie) | -166 dBm |
| Gevoeligheid (Heracquisitie) | -160 dBm |
| Gevoeligheid (Koude start) | -148 dBm |
| Gevoeligheid (Hete start) | -160 dBm |
| Nauwkeurigheid (Horizontale positie) | 2.0 m CEP |
| Nauwkeurigheid (Snelheid) | 0.05 m/s |
| Nauwkeurigheid (Dynamische richting) | 0.3 deg |
| Nauwkeurigheid (Tijdspuls) | RMS 30 ns; 99% 60 ns |
| Verkrijging (Koude start) | 27 s |
| Verkrijging (Hete start) | 1 s |
| Verkrijging (Geassisteerde start) | 1 s |
| Baudrate | 4800 bps - 921600 bps (standaard 115200 bps) |
| Uitgangsniveau | TTL-niveau |
| Protocol | NMEA, UBX |
| NMEA-berichten | RMC, VTG, GGA, GSA, GSV, GLL |
| Updatefrequentie | 0.25 Hz - 18 Hz (standaard 1 Hz) |
| FLASH | Met FLASH kan de configuratie worden gewijzigd, en de stroom gaat niet verloren |
| Tijdspuls signaal | Configureerbaar van 0,25 Hz tot 10 MHz; standaard periode 1 s; hoog niveau duurt 100 ms |
| Werkbeperkingen (Hoogte) | 80.000 m |
| Werkbeperkingen (Snelheid) | 500 m/s |
| Werkbeperkingen (Gravitatieversnelling) | < 4 g |
| Voedingsspanning | DC 3,6 V - 5,5 V (typisch 5,0 V) |
| Stroom | 30 mA / 5,0 V |
| Grootte | Φ56,7 mm x 18 mm |
| Afmetingen tolerantie | Φ56,7 ± 0,3 mm; 18.0 ± 0.3 mm |
| Gewicht | 65 g |
| Kabel lengte | 30 cm |
| Aansluitingen | 1 x 1.25 pitch 6-pins socket; 1 x 1.25 pitch 4-pins socket |
| Montage | Met 3M-adhesief aan de onderkant |
| Bedrijfstemperatuur | -40 C tot +85 C |
| Opslagtemperatuur | -40 C tot +105 C |
| Kompas | Ingebouwd kompas, elektronische kompas IC IST8310 |
Pinout / Interfaces
1.25 Pitch 6-Pin (UART + Voeding)
| Aarde | Aarding |
| TX | UART communicatie-interface, TTL-niveau (GPS gegevensuitgangspen) |
| RX | UART communicatie-interface, TTL-niveau (GPS gegevensinvoerpen) |
| VCC | Netvoeding, DC-ingang (DC 3.6 V - 5.5 V; standaard 5.0 V) |
1.25 Pitch 4-Pin (Kompas I2C)
| SCL | Seriële Klok - I2C bus master/slave klok (IST8310 kompas klok) |
| SDA | Seriële Gegevens - I2C bus Master/Slave Gegevens (IST8310 kompas gegevens) |
Beschikbare Opties
- Model: BE-508i
- Model: BK-508i
Voor integratievragen (bedrading, UART/baudrate-instellingen of tijdpulserconfiguratie), neem contact op met [email protected] or bezoek https://rcdrone.top/.
Details

Volledige BE-508i referentieblad met belangrijke specificaties, bedrading pinout voor UART + kompas I2C, en mechanische afmetingen voor montage.
Related Collections
