跳轉至產品訊息
1 的 4

CODDAR 500mAh 1S 3.8V 100C LiHV Battery – PH2.0 & A30

CODDAR 500mAh 1S 3.8V 100C LiHV Battery – PH2.0 & A30

CODDAR

正常價格 $14.23 USD
正常價格 銷售價格 $14.23 USD
銷售 售罄
含稅。 船運 結帳時計算。
Battery
Connector
查看完整詳細信息

Overview

The CODDAR 500mAh 1S LiHV battery supplies 3.8 V nominal power for compatible micro FPV drones. It combines a 100C discharge rating with a slim single-cell pack and a choice of wired or capped PH2.0 and A30 connectors.

Features

  • 500mAh high-voltage lithium-polymer cell in a 1S1P configuration, with 1.90 Wh nominal energy.
  • 100C discharge rating for compatible micro-drone power systems.
  • Wired versions use a flexible lead, while capped versions place the connector at the end of the pack.
  • 3.8 V nominal voltage and a 4.35 V full-charge limit using LiHV charging mode.
  • Configuration-specific dimensions and weights help match the battery holder and aircraft weight allowance.

Specifications

Brand CODDAR
Chemistry High-voltage lithium polymer (LiHV)
Capacity 500mAh
Cell configuration 1S1P
Nominal voltage 3.8 V
Nominal energy 1.90 Wh
Discharge rating 100C
Full-charge voltage 4.35 V in LiHV mode
Charge rate 1C–5C (0.5–2.5 A), within charger and connector limits
Storage voltage Approximately 3.85 V
Recommended landing voltage Approximately 3.5 V for this 1S pack

Connector and body comparison

Connector Model Body size (L × W × H) Approximate net weight
Wired PH2.0 CD1S500100HVC 60 × 17 × 6.5 mm 12.5 g
Wired A30 CD1S500100HVC 60 × 17.5 × 6 mm 12 g
Capped PH2.0 CD1S500100HVP 59 × 17 × 6.5 mm 12.5 g
Capped A30 CD1S500100HVP 60 × 17.5 × 6 mm 12 g

A small white inline connector option is also available. Its connector series, pin spacing, exact dimensions and net weight are unspecified. Select it only after confirming the connector fit and polarity for your aircraft. The pictured PH2.0 and A30 configurations correspond to their named options.

Charging and storage

Use a compatible 1S LiHV charger and select LiHV mode with a 4.35 V full-charge limit. Store the pack at approximately 3.85 V. During flight, plan to land around 3.5 V and avoid fully depleting the battery, which can cause over-discharge damage and prevent further use or charging.

What's Included

One CODDAR 500mAh 1S 3.8V 100C LiHV battery fitted with the selected connector.

Applications

For micro FPV drones and other small aircraft designed for a 1S LiHV battery. Match the connector, polarity, full-charge voltage, battery-holder dimensions and weight allowance before installation.

FAQ

Which charging mode does this battery use?
Use 1S LiHV mode with a 4.35 V full-charge limit. The nominal pack voltage is 3.8 V.

How do the wired and capped options differ?
Wired versions have a flexible connector lead. Capped versions place the connector at the pack end. Compare the configuration-specific dimensions and connector position before selecting.

What is the small white inline connector option?
It is a separate connector option with unspecified connector series and pin spacing. Confirm physical fit and polarity before choosing it.

Visual Details

CODDAR 500mAh LiHV wired ph20 dimensions
The wired PH2.0 version measures 60 × 17 × 6.5 mm and weighs approximately 12.5 g. Allow additional space for the wire and connector.
CODDAR 500mAh 1S LiHV wired a30 dimensions
The wired A30 version measures 60 × 17.5 × 6 mm and weighs approximately 12 g. The connector is attached to a flexible lead.
CODDAR 500mAh 1S LiHV wired a30 specifications
Model CD1S500100HVC uses a 1S1P 500mAh LiHV cell rated at 3.8 V and 100C. This specification panel shows the wired A30 configuration.
CODDAR 500mAh 1S LiHV capped ph20 dimensions
The capped PH2.0 version measures 59 × 17 × 6.5 mm and weighs approximately 12.5 g. Check the cap-mounted connector position against your battery holder.
CODDAR 500mAh 1S LiHV capped a30 dimensions
The capped A30 version measures 60 × 17.5 × 6 mm and weighs approximately 12 g. Match the cap orientation and connector to your model.
CODDAR 500mAh 1S LiHV capped a30 specifications
Model CD1S500100HVP uses the same 500mAh, 3.8 V, 100C cell specification in a capped layout. This panel shows the A30 connector.