Ovonic 130C 550mAh 3S 11.1V LiPo Battery 4-Pack XT30/JST-XHR-4P for Micro FPV Drones

Overview

OVONIC 11.1V 130C 550mAh 3S LiPo battery (4-pack) with XT30 plug for micro FPV drones. Designed for compact brushless FPV builds that require high discharge performance, it is commonly used on 90mm–130mm quads such as BetaFPV Beta85X and Torrent 110, as well as other compatible 3S setups.

Key Features

• High discharge rate: 130C
• 3S configuration: 3S1P, 11.1V nominal
• Connectors: XT30 discharge plug + JST-XHR-4P balance plug
• Wire gauge: 16 AWG
• Manufacturer-stated cell construction comparison: “Stacking Technology” vs “Winding Technology” with +6% higher energy density, +12% longer running time, -8% lower battery swelling, and -4% lower internal resistance

Specifications

What's Included

• 4 x OVONIC 130C 11.1V 550mAh 3S LiPo Battery with XT30 Plug
• 1 x Packaging box
• 2 x Brand stickers
• 1 x User manual

Applications

• Micro FPV racing drones: Beta75X, Alpha A75, HGL Petrel 120x, CineBee
• Freestyle & toothpick builds: 2.5-inch CineWhoops, 3S cinewhoop, Cinelog, Toothpick drones
• Other RC models (fit-dependent): small quadcopters, helicopters, RC cars/trucks, boats, small airplanes

Ensure compatibility by matching voltage, dimensions, and plug type with the model’s battery bay and power system (motor/ESC requirements).

Please Notice

1. Use a suitable RC LiPo balance charger for charging and maintenance.
2. Confirm both voltage (3S) and connector type (XT30 / JST-XHR-4P) before use.
3. Cease charging immediately upon reaching 4.2V per cell (normal voltage range: 3.7V~4.2V).
4. Inspect the battery condition before each use.
5. If a new battery does not hold a full charge or loses charge rapidly, use a balance charger and cycle it several times.

For product questions or after-sales support, contact https://rcdrone.top/ or email [email protected].

Details

Built for micro FPV builds, this 3S 550mAh pack pairs a high 130C discharge rating with an XT30 lead and JST-XHR-4P balance plug in a compact 46g size.

Ovonic highlights its stacking cell construction for higher energy density and longer runtime, while helping reduce swelling and internal resistance versus conventional winding designs.

A quick performance overview compares key priorities for RC power—energy density, discharge capability, cycle life, safety, and lower internal resistance.

The 4-pack arrives with a branded storage box plus stickers and a user manual for setup and care.

Beyond FPV quads, the same 3S pack can power other small RC models when the voltage, dimensions, and connector type match your battery bay and power system.