• iFlight Borg F7 AIO flight controller board with JST connector, labeled solder pads, and four mounting holes
  • Top view of iFlight Borg F7 AIO flight controller PCB with edge plug connectors and marked +/− power pads.
  • iFlight Borg F7 AIO flight controller board with labeled solder pads, mounting holes, and side connector
  • iFlight Borg F7 AIO flight controller board with mounting holes, plug-in connectors, and labeled solder pads
  • iFlight Borg F7 AIO flight controller board with labeled solder pads and side connector layout
  • Close-up of iFlight Borg F7 AIO flight controller board with connector and labeled multiple UART port support
  • iFlight Borg F7 AIO flight controller PCB with built-in ELRS 2.4GHz receiver and RS solder pad switching
  • Close-up of iFlight Borg F7 AIO flight controller PCB highlighting the integrated BEC with 5V 2A output
  • iFlight Borg F7 AIO Flight Controller, Promotional graphic for iFlight Borg AIO flight controller integrating flight controller, ESC and receiver with 2–4S input
  • iFlight Borg F7 AIO flight controller close-up showing STM32F722 MCU, OSD chip, and 16MB black box storage
  • iFlight Borg F7 AIO flight controller/ESC board with multiple plugs, MOSFET array, and 18A continuous current callout
  • Close-up of iFlight Borg F7 AIO flight controller board highlighting built-in TVS transient voltage suppressor
  • iFlight Borg F7 AIO Flight Controller, iFlight Borg F7 AIO (RX) flight controller board with labeled pads, mounting holes, and plug connectors
1 13

iFlight Borg F7 AIO 飛控 + 18A 4合1電調，含 ELRS 2.4G 接收器，適用於 Defender 20 Lite

iFlight Borg F7 AIO 飛控 + 18A 4合1電調，含 ELRS 2.4G 接收器，適用於 Defender 20 Lite

iFlight

$97.87 USD
$97.87 USD
特價 售罄
已包含稅額。 結帳時計算運費。
  • PayPal
  • Visa
  • Mastercard
  • American Express
  • JCB
  • Discover
  • Diners Club
  • Google Pay
  • Apple Pay
查看完整資訊

概述

iFlight Borg F7 AIO 是一款針對 Defender 20 Lite 的一體化飛行控制器解決方案，將飛行控制器、4合1 ESC 和 ELRS 2.4G 接收器集成在單一電路板上，以簡化接線並減少組裝重量和複雜性。

主要特點

  • 集成 FC + ESC + 板載 ELRS 2.4G 接收器（內置天線），支持切換到外部接收器
  • 板載蜂鳴器以減少外部元件
  • 接口設計：電機 SH1.25 3P；視頻發射器 SH1.0 9P；USB SUR 0。8 7P (不包括預留墊片)
  • VTX 協議支持：DJI MSP、SmartAudio、IRC Tramp、HDZero

規格

飛行控制器 (FC)

輸入電壓 2-4S (支持 LiHV)
MCU STM32F722
陀螺儀 ICM42688
氣壓計 SPA06-003
OSD 芯片 AT7456E
閃存 16MB (黑匣子閃存)
UARTs 4
電機輸出 4
I2C 串行 支持
VTX 協議 DJI MSP / SmartAudio / IRC Tramp / HDZero
LED 控制器 是
蜂鳴器墊片 是
固件目標IFLIGHT_BLITZ_F722_X1 (Betaflight)
安裝模式 25.5*25.5mm, φ3
尺寸 32*32 mm ±1
重量 6.8g ±1
BEC 5V 2.5A

ESC

輸入電壓 2-4S (支持LiHV)
持續電流 18A
MCU STM32G071
驅動器 FD6288
固件 BL32 (32位ESC)
目標 IFLIGHT BLITZ G3 - Rev. 32.9
當前速率 200 (1/10mV/A)
BEC 不適用
遙測 支持
雙向DSHOT 支持
協議 DShot150/300/600, MultiShot, OneShot等。

包含內容

  • 1 x Borg F7 AIO 與接收器
  • 1 x 電纜組
  • 4 x 矽膠墊圈

VTX_ON_OFF 模式命令

資源 PINIO 1 C0
設置 pinio_config = 1,1,1,1
設置 pinio_box = 40,41,255,255
設置 box_user_1_name = VTX_ON_OFF
aux 0 40 8 900 2100 0 0
保存

注意

有關產品選擇和設置支持，請聯繫 https://rcdrone.top/ 或 support@rcdrone.top.

iFlight 產品僅供娛樂用途，不支持自主飛行。

Related Collections