略過產品資訊
1 / 10

T-Motor MN701-S KV135 無人機馬達套裝(2件裝)IP45 無刷馬達,適用於多旋翼/垂直起降/固定翼

T-Motor MN701-S KV135 無人機馬達套裝(2件裝)IP45 無刷馬達,適用於多旋翼/垂直起降/固定翼

T-MOTOR

定價 $615.97 USD
定價 售價 $615.97 USD
特價 售罄
已包含稅額。 結帳時計算運費
查看完整資訊

概述

T-Motor Navigator MN701-S KV135 是一款無刷 UAV 馬達,專為多旋翼、垂直起降 (VTOL) 和固定翼平台設計。它具有 IP45 防護等級(防塵、防水、抗腐蝕)以及使用離心風扇、網格狀進氣孔和帶散熱片的馬達底座的冷卻結構,以改善散熱效果。

主要特點

  • 最大推力:9.7 公斤 (9.7+ 推力聲明)
  • 冷卻設計:散熱性能比普通電機好15%
  • 手動繞線,使用特殊的高溫耐受漆包線
  • 高溫耐受磁鐵,具備耐熱和過載能力
  • IP45 防護等級:防水、防塵、抗腐蝕
  • 鎖定方式:T型軸用卡圈和螺絲固定,以幫助防止在高轉速下轉子鬆動
  • 8 毫米鋼軸和大軸承,具備抗衝擊性、穩定性和壽命
  • 曲面磁鐵設計:有助於提高電機性能超過5%
  • 平均故障間隔時間:約1000小時

規格

品牌 T-Motor
系列 導航者
型號 MN701-S
KV 135
防護等級IP45
最大推力 9。7 公斤 (9.7+ 推力聲明)
散熱改善 比普通馬達好 15%
性能提升 (磁路) 5%+
8 毫米鋼軸
平均故障間隔時間 (MTBF) 約 1000 小時

應用

  • 多旋翼、垂直起降、固定翼無人機
  • 航拍 (一般用途)
  • 貨運無人機、系留平台、測繪和檢查

包含內容

  • 2x T-Motor MN701-S KV135 無刷馬達 (2PCS/SET)
  • 1x 硬體包

配對指南

  • T-MOTOR G26*8.5 螺旋槳

如需預售兼容性檢查和批量訂單,請聯繫 support@rcdrone.top or 訪問 https://rcdrone.top/.

詳細

T-Motor MN701-S KV135 motor front view with silver housing, mounting holes, and IP45 rating icons

T-Motor MN701-S KV135 馬達擁有乾淨、簡單的安裝面,並具備 IP45 等級,以增加戶外設置的保護。

Exploded view of a T-Motor showing centrifugal fan bell cap, grid inlet holes, and finned base for cooling

T-Motor 採用以冷卻為重點的設計,配備離心風扇鐘罩、網格式進氣孔和帶鰭片的馬達底座,以幫助散熱。

T-Motor, Motor airflow and temperature simulation diagram with heat map scale in Kelvin and contour lines

馬達氣流模擬圖使用開爾文溫度標度可視化熱分佈和氣流路徑模式。

T-Motor MN701S motor infographic showing IP45 protection grade with waterproof, dust-resistant, and anti-corrosion icons

T-Motor MN701S 馬達的保護等級為 IP45,具備防水、防塵和防腐蝕的設計特徵。

T-Motor, Exploded view of MN701S motor shaft locking method with screw, washer, and circlip for secure rotor retention

MN701S 使用 T 形軸鎖定方法,配合卡環、墊圈和螺絲,幫助保持轉子穩固固定。

Cutaway view of T-Motor MN701S showing 8mm steel shaft and large bearing design for durability

MN701S 使用 8mm 鋼軸和大型軸承,以支持穩定運行和延長使用壽命。

T-Motor graphic comparing curved magnets vs ordinary magnets, noting performance optimization and 5%+ improvement

T-Motor 使用曲形磁鐵,並精確控制公差,以優化磁路,聲稱性能提升超過 5%。

T-Motor, Integrated prop installation method diagram with prop adapter, covers, and M3 mounting screws for different prop sizes

集成螺旋槳安裝使用帶有 M3 螺絲的螺旋槳適配器,並根據螺旋槳直徑(低於 22" 或高於 24")使用不同的蓋子尺寸。

T-Motor foldable prop installation guide showing M3 and M4 mounting screws and optional prop adapter for different prop sizes

可折疊螺旋槳安裝根據螺旋槳大小使用不同的安裝螺絲,對於 22 英寸及更小的螺旋槳,提供可選的螺旋槳適配器和 M3 硬體,對於 26 英寸及更大的螺旋槳,使用 M4 螺絲。

T-Motor MN701-S KV135 brushless drone motors with ALPHA 80A HV FOC ESC and wiring leads

T-Motor MN701-S KV135 馬達與 ALPHA 80A HV FOC ESC 配對,提供乾淨、簡單的電源設置。