• Surpass Hobby BAT MS6215 210KV brushless motor, angled top and side product view
  • Surpass Hobby BAT MS6210 180KV brushless motor, angled top and side product view
  • MS6210 180KV motor with three lead wires, mounting plate, and two sets of screws
  • MS6215 210KV motor with three lead wires, mounting plate, and two sets of screws
  • Brushless motor stator close-up showing copper windings, magnets, and center bearing
  • Rear mounting face of the brushless motor with vent openings, bearing, and lead-wire exit
  • Close rear view of motor ventilation slots, copper windings, and center bearing
  • MS6215 210KV motor top mounting face with threaded propeller shaft and wire leads
  • MS6215 210KV brushless motor with Surpass Hobby side logo and threaded shaft
  • Inside view of the motor bell housing with circular magnet segments and threaded shaft
  • Detailed stator assembly view with copper coils, green insulation, and center bearing
  • Motor bell interior close-up showing the magnet ring and structural support ribs
  • MS6210 180KV motor top mounting face with threaded propeller shaft and wire leads
  • MS6210 180KV brushless motor with Surpass Hobby side logo and threaded shaft
1 14

Surpass Hobby BAT MS6210 180KV / MS6215 210KV 無刷馬達，適用於小型多旋翼無人機

Surpass Hobby BAT MS6210 180KV / MS6215 210KV 無刷馬達，適用於小型多旋翼無人機

Surpass Hobby

$79.00 USD
$79.00 USD
特價 售罄
已包含稅額。 結帳時計算運費。
選項
  • PayPal
  • Visa
  • Mastercard
  • American Express
  • JCB
  • Discover
  • Diners Club
  • Google Pay
  • Apple Pay
查看完整資訊

概述

Surpass Hobby BAT MS6210 和 MS6215 無刷 馬達 選項專為小型多旋翼無人機設計。選擇 MS6210 180KV 或 MS6215 210KV 版本，以適用於檢查、測量和物流無人機平台的 12S LiPo 推進系統。

主要特點

  • 可拆卸的馬達結構，便於清潔。
  • 前後通風口支持散熱。
  • N48SH 磁性材料、0.2 毫米矽鋼片和 220 C 高溫耐受的漆包線。
  • NMB 626ZZ 軸承。
  • 兩種四孔螺旋槳安裝模式：12 毫米和 18 毫米孔距。

如需選擇協助或產品支持，請聯繫 rcdrone.top.

規格

參數 MS6210 MS6215
KV 評級 180KV 210KV
最大功率 3546.4 W 4401.8 W
最大電流 77.72 A 82.02 A
空載電流 0.50 A 0.51 A
電阻 84.31 mOhm 41.45 mOhm
槽/極配置 18N24P 18N24P
電動機尺寸 68.8 x 36 mm 68.8 x 41 mm
定子尺寸 62 x 10 mm 62 x 15 mm
軸 6 mm (M6) 6 mm (M6)
引線 14 AWG, 670 mm 14 AWG, 670 mm
包括引線的重量 324.2 g 400 g
最大推力 8.4 kg 13.2 kg
推薦 電池 12S LiPo 12S LiPo
推薦螺旋槳 2265 MF2311P
推薦ESC HV260A(V5) HV260A(V5)
每個轉子推薦推力 3.5-5 kg 4-6.5 kg
建議的四旋翼起飛重量 14-20 kg 16-26 kg

應用

適用於用於檢查、測量和物流操作的多旋翼無人機平台。

詳細資訊

Surpass Hobby BAT MS6210 and MS6215 brushless motors for small multirotor dronesMS6210 and MS6215 motor comparison with weight, maximum thrust, and quadrotor takeoff weight

MS6210的最大推力為8.4 kg，而MS6215的最大推力可達13.2 kg。

12S LiPo propulsion setup reference for MS6210 and MS6215 with propeller and ESC recommendationsExploded Surpass Hobby drone motor view with detachable housing, stator, and vent openings

可拆卸結構和前後通風有助於簡化清潔並支持散熱。

Close view of the motor rotor with N48SH high-temperature-resistant magnetsDrone motor propeller mount with 12 mm and 18 mm four-hole installation patterns

兩種四孔安裝模式，間距為12 mm和18 mm，適用於兼容的螺旋槳 中心。

Motor stator detail with NMB 626ZZ bearing, copper windings, and silicon steel sheets

NMB 626ZZ軸承、0.2 mm矽鋼片和220 C漆包線支持可靠的馬達結構。

MS6210 and MS6215 specifications, thrust-test data, and dimensional drawings

Related Collections