M.2 SSD Enclosure for Jetson Orin Nano/NX, Xavier NX, TX2-NX | USB 3.1 Gen2 10Gbps NVMe 2230-2280

Overview

This M.2 SSD enclosure converts an M.2 NVMe SSD into portable USB storage for fast data transfer, system image writing, and backup workflows. It uses a USB 3.1 interface (USB 3.1 Gen2 Type-C master control solution) with a stated maximum read speed up to 10Gbps, and an aluminum alloy housing to help protect the SSD and improve heat dissipation. It is suitable for Windows/Linux platforms and can be used for SSD flashing and system image file backup on Jetson series devices.

Key Features

• NVMe only: Supports M.2 NVMe protocol; supports PCIe 3.0 and PCIe 4.0 protocol solid state drives.
• Keying support: Supports M Key and B&M Key M.2 SSDs.
• Form factor support: Supports M.2 sizes 2230/2242/2260/2280.
• USB-C connection: Type-C interface with reversible plug design.
• Fast transfer: USB 3.1 Gen2 with transmission speed marked as 10Gbps.
• Capacity support: Marked support capacity ≤ 4TB.
• Not supported:M.2 SATA / mSATA is not supported; NVMe protocol only (not SATA protocol).
• Jetson flashing/backup use: Supports M.2 SSD flashing and system backup for Jetson Orin Nano SUPER / Jetson Orin NX SUPER / Jetson Xavier NX / Jetson TX2-NX.
• General device use: Can be used as a removable drive with common devices such as computers, TVs/set-top boxes, routers, and PS4.

For compatibility questions or setup assistance, contact support at https://rcdrone.top/ or email support@rcdrone.top.

Specifications

What's Included

• M.2 SSD enclosure
• Data cable
• Screwdriver
• Screws (4 pcs)

Applications

• Jetson board SSD flash and system image file backup
• Write system images and back up systems for Jetson Orin Nano SUPER, Orin NX SUPER, Xavier NX, and TX2-NX
• Portable/removable storage for computers
• External storage use with TV/set-top box, router, and PS4

Installation

1. Unscrew the screws and open the side cover.
2. Pull out the chip base and install the SSD.
3. Close the cover and tighten the screws.

Details

Choose an M.2 NVMe SSD in common 2230–2280 sizes to pair with the enclosure for portable storage or Jetson workflows.

Turn an NVMe M.2 drive into fast USB‑C storage for Jetson flashing, system image writing, and backups.

USB 3.1 Gen2 connectivity and an aluminum housing help balance speed, portability, and heat dissipation.

Works with Windows and Linux and is designed for Jetson development tasks such as image backup and restore.

Supports common Jetson modules used for flashing and system backup, including Orin Nano SUPER and Xavier NX.

A straightforward workflow for developers: connect over USB‑C, back up the IMG file, then flash and deploy to the Jetson.

Beyond Jetson, it also functions as removable USB storage for everyday devices like PCs, TVs, routers, and consoles.

USB 3.1 Gen2 Type‑C is marked for up to 10Gbps transfer to speed up large file moves and backups.

Built for NVMe drives and supports PCIe 3.0/4.0 protocol SSDs for broad compatibility.

Fits popular M.2 NVMe lengths (2230–2280) and supports both M‑Key and B&M‑Key drives.

Tool-assisted assembly takes just a few steps: open the cover, install the SSD, then secure it with the screws.

NVMe-only design supports M‑Key and B&M‑Key SSDs; M.2 SATA and mSATA drives are not supported.

Compact aluminum enclosure with USB 3.1 and marked support up to 10Gbps and ≤4TB capacity.

Everything needed for installation is included: enclosure, cable, screwdriver, and mounting screws.

A slim, pocket-friendly M.2 NVMe SSD enclosure that opens easily for quick drive swaps.