• 5-Layer Acrylic Case bottom panel with layered black-and-clear acrylic and port cutouts
  • Installation steps diagram showing acrylic layers, brass standoffs, and screw set (1–5)
  • 5-Layer Acrylic Case for Raspberry Pi 5 with dimensions shown (93.50 × 66.50 × 25.50 mm)
  • Top-view port and hole alignment graphic for assembled case, labeled GPIO, USB, HDMI, PCIe and more
  • Raspberry Pi 5 installed in acrylic case with fan and heatsink, showing aligned USB and Ethernet cutouts
  • Underside view of Raspberry Pi 5 mounted in layered acrylic case with brass standoffs and corner screws
1 6

適用於Raspberry Pi 5的五層壓克力保護殼，93.50×66.50×25.50mm，預留主動散熱空間

適用於Raspberry Pi 5的五層壓克力保護殼，93.50×66.50×25.50mm，預留主動散熱空間

Yahboom

$15.02 USD
$15.02 USD
特價 售罄
已包含稅額。 結帳時計算運費。
  • PayPal
  • Visa
  • Mastercard
  • American Express
  • JCB
  • Discover
  • Diners Club
  • Google Pay
  • Apple Pay
查看完整資訊

概述

這款適用於 Raspberry Pi 5 的五層壓克力外殼旨在保護電路板，同時保持 WiFi 和藍牙信號傳輸不受阻礙。外殼提供預留的頂部空間以連接 Raspberry Pi 5 官方主動散熱器（需另購），並具有匹配的開孔以便於關鍵端口和接頭的外圍設備訪問和擴展。

主要特點

  • 5層壓克力面板結構，用於保護Raspberry Pi 5
  • 透明壓克力設計；被描述為美觀且防塵
  • 支持銅柱固定
  • 預留空間以連接Raspberry Pi 5官方主動冷卻器（需另購）
  • 孔位清晰且易於安裝
  • 端口/接頭訪問（標記）：40PIN GPIO，風扇接口，USB接口*4，網絡端口接口，POE接口，CSDISI接口*2，UART串口接口，Micro HDMI*2，電源接口，RTC電池連接接口，電源開關，PCIE接口，SD卡槽

規格

產品類型 Raspberry Pi 5的5層壓克力外殼
尺寸 93.50*66.50*25.50mm
材質 壓克力
顏色 黑色壓克力，透明壓克力
銅柱 M2*5mm 雙通銅柱*4
螺絲 M2*18mm 圓頭螺絲*4

注意：此產品僅支持 Raspberry Pi 5 官方主動散熱器，不支持其他散熱器。

包含內容

  • Raspberry Pi 5 五層壓克力外殼*1（包括電源按鈕 + 銅柱 + 螺絲）

注意：運送清單不包括 Raspberry Pi 5 板和 Raspberry Pi 5 官方主動散熱器。

如有售前兼容性問題或售後支持，請聯繫[email protected] or 訪問https://rcdrone.top/.

詳細信息

Promotional banner for Raspberry Pi 5 board purchase (board not included with the acrylic case).5-layer acrylic case for Raspberry Pi 5, transparent stacked enclosure with port cutouts and space for official active cooler.

五層壓克力外殼在保護 Raspberry Pi 5 的同時，保持板可見且接口易於接觸。

Raspberry Pi 5 installed in 5-layer acrylic enclosure with reserved top space for the official active cooler (sold separately).

預留的頂部空間支持安裝Raspberry Pi 5官方主動冷卻器（需另購）。

Banner link to buy the Raspberry Pi 5 official active cooler (cooler sold separately).Top-down view with labeled cutouts for GPIO, USB, Ethernet, PoE, CSI/DSI, UART, Micro HDMI, power, PCIe, and switch.

匹配的開口與主要的Raspberry Pi 5接口對齊，便於電纜布線和擴展。

Bottom view highlighting accessible SD card slot and integrated power switch on the acrylic case.Side view of assembled case with Raspberry Pi 5 official active cooler installed; note compatibility with official cooler only.

專為Raspberry Pi 5官方主動冷卻器設計，不兼容其他冷卻器樣式。

Exploded view of the five acrylic layers, showing the order of panels used to assemble the enclosure.Underside view showing M2×5 mm double-pass copper pillars used to fix the board securely inside the case.

銅柱和螺絲提供穩定的安裝，同時保持分層的壓克力結構。

Step-by-step assembly guide for installing Raspberry Pi 5 into the 5-layer acrylic case and tightening screws.Shipping list graphic: 5-layer acrylic case set including power button, copper pillars, and screws (board and cooler not included).

盒內包含：帶電源按鈕的壓克力外殼套件、銅柱和螺絲；不包括Raspberry Pi 5和冷卻器。

Product parameters image with overall dimensions 93.5×66.5×25.5 mm and acrylic material notes.Real product photos of the : empty frame and assembled enclosure with board and cooler installed.

實物照片展示了分層框架設計和組裝完成後的成品。

Buy on Amazon.us banner with shopping cart icon.

Related Collections